China 1024x600 HMI panel display Manufacturer, Supplier, Factory

The VXT430HWE-03-W is a 4.3-inch TFT module with 800 x 480 resolution — nearly three times the pixel count of the 480 x 272 panels that dominate this size — and an operating range of -30 to +85°C, the widest of any 4.3-inch module we offer. Storage goes to -40°C, the only module in the range rated that low. It is transmissive with an anti-glare polarizer and no touch panel. What stands out is how much is published: brightness of 640 minimum and 800 typical, contrast of 640 minimum and 800 typical, and logic current given for three screen contents — 73 mA on black, 102 mA on a single colour, 105 mA on white — rather than one vague number, which lets you size for the worst case and shows a dark interface genuinely saves power. The backlight is 16 LEDs at 1.024 W, and reliability covers ten tests including vibration at 10-55 Hz and mechanical shock at 60 G, with MTBF of 50,000 hours.

The CTP-VX121B5563-GG is a 12.1-inch capacitive touch panel in G+G construction with a 1.8 mm cover glass — the thickest in our range, about 1.6 times the usual 1.1 mm — bonded to the sensor with 0.2 mm SCA rather than a foam gasket. That combination is built for unattended and high-abuse installations. Transmittance is at least 85% with ≥6H hardness, and the total stack is 2.7 mm. Suited to industrial HMI, outdoor kiosks, transport terminals and medical equipment.

This Victronix 2.8inch 240*320 Projected capacitive touch IPS TFT Module combines a bright 240×320 IPS TFT panel (16.7M colors, 800 cd/m² brightness) with advanced 5-finger projected capacitive touch (≥6H hardness, ≥85% transparency). As a professional TFT module manufacturer and supplier in China, this Victronix 2.8inch TFT Module uses an industrial-grade design to provide superior application performance.

The Victronix VXT700WRA-01 is a 7.0-inch TFT LCD module with 800 x 480 pixel resolution and support for up to 16.7M colors, built for embedded and industrial equipment that needs a compact, easy-to-drive display. Its 24-bit parallel RGB interface with DE (data enable) and DCLK lets most mainstream MCUs and MPUs — STM32, NXP i.MX, Allwinner, Rockchip and similar — drive the panel directly from their on-chip LCD controller, with no LVDS serializer or bridge chip and no extra BOM cost. The module runs from a single 3.3 V logic supply, uses an RM53052 / RM57452 driver IC, and is rated for a -20°C to +70°C operating range, so it works in unheated enclosures and outdoor cabinets.

The VXT177HSS-13 combines 500 cd/m² typical brightness with a 4-wire SPI interface in a compact 1.77-inch TFT LCD. An ST7735V driver and 12-pin connection make the module an option for embedded designs that prioritize display brightness and serial connectivity.

The VXT700YIA-02C combines a portrait TFT display with an optically bonded capacitive touch panel. Its tall viewing area suits scrolling menus and guided workflows, while 10-point touch supports interactive functions through compatible host software.