China 1024x600 touch screen module Manufacturer, Supplier, Factory

This Victronix 7.84 inch 400x1280 Bar IPS TFT Module is a high-performance 7.84 inch TFT LCD module designed for industrial embedded systems. Featuring a 400(RGB) × 1280 resolution and a 59.40 × 190.08 mm active area, this module delivers sharp, distortion-free images with a wide 160° viewing angle (H/V). The 400 cd/m² typical brightness and 900:1 contrast ratio ensure vivid readability even in challenging lighting conditions. As a professional manufacturer and supplier of TFT modules in China, Victronix 7.84 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 7 inch 800x1280 MIPI IPS TFT Module is a high-resolution 7-inch TFT LCD module engineered for demanding environments. Featuring an 800×(RGB) ×1280 pixel resolution and a crisp 150.72 × 94.2 mm active area, this display delivers exceptional visual clarity with a pixel density of 0.11775 mm. As a professional TFT module manufacturer and supplier in China, this Victronix 7 inch TFT Module is strictly compliant with the ROHS environmental standards to provide superior application performance. We offer a customized service to meet the needs of our customers.

The VXT430HNS-01-W is a 4.3-inch transmissive TFT module with 480 x 272 resolution, an anti-glare polarizer, and an operating range of -30 to +85°C, without touch. Its most useful property only appears when you compare it with a sibling: it shares the mechanical envelope, connector and pin-out of the VXT430HWE-03-W, which is the same module at 800 x 480 — same outline, same 40-pin assignment, same contrast and viewing angle — with one third the frame buffer at 255 KB. That makes resolution a choice you can defer rather than a decision that locks your mechanics. Pixels are exactly square at 0.198 x 0.198 mm, so circles, dials and round indicators need no artwork correction. Brightness is given as 440 minimum, 550 typical and 660 maximum, with contrast at 640 minimum and 800 typical. Reliability covers ten tests including vibration and 60 G shock, with MTBF of 50,000 hours. Two gaps are stated plainly: logic supply current is not published, and storage temperature is not wider than operating.

The CTP-VX215A5698-GG is a 21.5-inch capacitive touch panel in G+G construction, sized for 1920x1080 displays and for the enclosures, VESA mounts and kiosk cabinets already built around that format. It adds touch to an existing panel instead of replacing the whole assembly. Transmittance is at least 85% with ≥6H surface hardness, response is ≤12 ms, and it runs from 2.8 to 3.3 V. Suited to kiosks, POS, industrial HMI and education displays, and to retrofitting touch onto existing 21.5-inch hardware.

The Victronix VXT700SWHW-01 is rated to +85°C, and down to -30°C — a 15°C wider window at the top and 10°C at the bottom than the usual industrial range. That difference is what lets a display live in a sealed enclosure under a hot roof, next to a power stage, or in a vehicle parked in direct sun, without a heater or a fan. Helping it along is a genuinely low power draw: just 100 mA typical at 3.3 V, about 0.33 W for the panel logic, so the module adds little heat of its own to an already hot box. The 800 x 480 panel uses square 0.1905 mm pixels for undistorted graphics, connects over single-channel LVDS on a compact 20-pin I-PEX or JAE connector, and offers MODE (6/8-bit) and SC (scan direction) control pins plus a separate 6-pin backlight connector with BLEN enable and VPDIM PWM dimming.

The VXT430HPWA-03C is a 4.3-inch TFT LCD module with 480x272 resolution and integrated capacitive touch, wired as two independent subsystems: the display runs on its own 40-pin interface and VDD rail, while the FT5446 touch controller has a separate 6-pin FPC and its own VDD-CTP supply. That lets you power the display down and keep touch alive, or reset touch without touching the display. Rated 850 cd/m² and -30 to +85°C, it suits outdoor handheld terminals, field instruments and portable equipment.