China 7 inch TFT with cover glass bonded Manufacturer, Supplier, Factory

This Victronix 2.2 inch 240x320 ILI9341V TFT Module is a high-quality 2.2 inch TFT LCD module designed for industrial, medical, and consumer electronics requiring vivid color performance and reliable operation. Featuring a 240 × 320-pixel resolution and 262K color depth, it delivers sharp visuals with an active display area of 33.84 × 45.12 mm (diagonal: 55.8 mm). As a professional manufacturer and supplier of TFT modules in China, Victronix 2.2 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 3.5inch 320*240 IPS TFT Module is a high-quality 3.5 inch TFT LCD module engineered for reliability in industrial, medical, and embedded systems. Featuring a 320 × 240 resolution with a sharp 70.08 × 52.56 mm active area, this Normally Black display delivers crisp visuals with a pixel pitch of 0.219 × 0.219 mm. As a professional manufacturer and supplier of TFT modules in China, Victronix 3.5 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT350QHI-26C is a 3.5-inch 320 x 480 portrait TFT LCD module with a capacitive touch panel, driven by ILI9488, and what sets it apart is that three interface families sit on one 50-pin FPC - 24-bit RGB, MCU parallel in 8, 9, 16, 18 or 24-bit form, and SPI - selected by three IM strap pins. The touch is a mutual-capacitance sensor on its own separate 20-pin FPC carrying seven TX and five RX lines. An active area of 48.96 x 73.44 mm whose 2:3 aspect matches the dot matrix precisely, and a diagonal of 88.265 mm, or 3.4750 inches. Contrast is 700 typical, all four viewing angles are 80 degrees with an ALL viewing direction so the module mounts any way round, uniformity carries a floor of 75 per cent, NTSC is 69 typical, and all eight CIE coordinates are published. The backlight is six LEDs in parallel at 120 mA with a forward voltage from 2.7 to 3.3 V, so a 3.3 V rail leaves no headroom and the current is high for a parallel array.

This Victronix 6.2 inch 800×480 TFT Module offers a typical brightness of 700 cd/m² and a contrast ratio of 600:1, ensuring excellent readability from various angles. Secondly, it integrates a backlight unit utilizing 18 white LEDs with a typical lifetime of 30,000 to 50,000 hours (to 50% initial brightness), ensuring clear visibility in all lighting conditions. Besides, it supports a 24-bit parallel RGB with DE/SYNC mode control interface and an ILI6123H + ILI5480 controller. In addition, it passes rigorous environmental testing, including thermal shock (-30°C ↔ +80°C cycles), humidity storage (60°C/90% RH), and mechanical vibration, ensuring it can operate seamlessly across an extended temperature range from -20°C to +70°C. This 6.2 inch TFT display by Victronix is commonly used in medical devices, vehicle displays, industrial control systems, and portable instrumentation where readability under varied lighting conditions is critical.

The Victronix VXT700WHA-02P​ is a 7.0-inch 800 × 480 TFT LCD module with a touch panel, driven by MOS_CHIP_G424A​ over an 18-bit parallel RGB interface on a 40-pin 0.5 mm Hirose FH19-40S-0.5SH connector. The reason to look at it is the interface freedom.​ A MODE pin selects between DE mode and SYNC mode, so it works with hosts that emit DE and hosts that emit only HS and VS. L/R and U/D give hardware scan inversion.​ And full numeric timing is published​ — 860 clocks by 528 lines at 27.2 MHz, which is exactly 60 Hz.

The CTP-T700GI-11 is a 7-inch capacitive touch panel in G+G construction with a genuinely compact 164 x 99 mm outline — only about 4.5 mm of border on each side, so it fits the display rather than replacing the front panel. Its view area measures 155.08 x 86.92 mm, a true 16:9 shape matched to 7-inch 1024x600 screens, with a 1.1 mm toughened cover glass. An ILI2511 controller runs five-point touch over I2C. Suited to industrial HMI, control panels, portable terminals and displays with a fixed bezel.