China 4.3 inch TFT -30 to 80 C Manufacturer, Supplier, Factory

This Victronix 1.77 inch 128x160 TFT Module is a high-quality 1.77 inch TFT LCD module designed for embedded applications requiring a compact, bright, and reliable display solution. Featuring a 128(RGB) × 160 pixel resolution and supporting 65K colors, this module delivers crisp visuals in a versatile form factor. As a professional manufacturer and supplier of TFT modules in China, Victronix 1.77 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 7 inch Equivalent of innolux LW700AT9309 is a high-performance 7 inch TFT LCD module engineered by Victronix for demanding industrial applications. Featuring an 800 × 480 (WVGA) resolution with 262K colors, this display delivers crisp visuals with a pixel pitch of 0.1905 × 0.1905 mm across its 152.4 × 91.44 mm active area. Encased in a compact 165.0 × 104.54 × 5.2 mm (W×H×T) design, it integrates seamlessly into embedded systems.

This Victronix 7 inch 800x480 Capacitive Touch TFT Module is a high-performance 7 inch TFT LCD module designed for industrial embedded systems. It features an 800×480 resolution screen, a capacitive touch panel (CTP), and a high-luminance backlight system within a compact form factor. As a professional manufacturer and supplier of TFT modules in China, this Victronix 7 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT121QXHA-01 is a 12.1-inch TFT module with 1024 x 768 pixels, and it is the only 4:3 panel in our 12.1-inch range — the other two are 1280 x 800. That matters because XGA in a 4:3 layout is what a very large installed base of industrial controllers, medical instruments and test equipment was designed around, and it remains the usual target when a display in existing hardware has to be replaced. The active area is 245.76 x 184.32 mm with pixels that are square to ten decimal places, so circles and dial scales stay true. Brightness is 1000 cd/m², the highest figure we publish in this size, and the viewing angle is 85° in all four directions with no stated best direction. The interface is 4-lane LVDS on a 20-pin connector, and it runs from a single 3.3 V rail — no separate gate or analogue supplies to generate. We are equally direct about what this module demands and what is not yet documented: the backlight draws about 14 W, which is over 90% of the module's total power and needs a real thermal plan; brightness and viewing angle are given as typical values without stated minimums; and the driver IC, outline dimensions and LVDS data mapping are not in the file we hold.

The VXT350MHSA-08 is a 3.5-inch portrait TFT module: 320 x 480 pixels over an active area of 48.96 x 73.44 mm, in a true 2:3 shape. What distinguishes it is how many ways it can be driven — RGB parallel, 3-wire SPI, 4-wire SPI and 8080-style MCU parallel all sit on one 50-pin connector, selected by three pins, IM0, IM1 and IM2, read at power-up. That means the interface stops being a decision you must make before choosing a display: you can prototype on SPI and move to RGB when you need the refresh rate, without changing the module, the connector or the enclosure. Driven by an ST7796U, it also runs its 3.0 V backlight with no boost converter — no inductor, no switching noise — unlike the other 3.5-inch modules in the range which need 18 to 19 V. Contrast is given as an 800:1 minimum, viewing angle is 80° in all four directions with viewing direction ALL, and total consumption is about 0.41 W from a measured 19.51 mA of logic current.

The VXT430BPSA-04 is a 4.3-inch TFT LCD module with 480x272 resolution and a true 24-bit RGB888 interface, supplied without touch. It shares its entire electrical and mechanical platform with our VXT430MPSA-16 and differs in one figure: a 20,000-hour backlight instead of 50,000. That makes it the choice where a display can be serviced easily — supervised indoor equipment, machine panels, instruments — rather than unattended installations where a service visit costs more than the panel. Rated -30 to +80°C.