China 400x1280 TFT LCD panel Manufacturer, Supplier, Factory

This Victronix 10.4 inch 800x600 RTP TFT Module is a high-performance 10.4 inch TFT-LCD module engineered for reliability in demanding industrial applications. Featuring an 800 × 600 (SVGA) resolution and the ability to display up to 16.7 million colors, it delivers crisp, vibrant visuals with excellent clarity. As a professional manufacturer and supplier of TFT modules in China, Victronix 10.4 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 2.3 inch 320x240 Ili9342c TFT Module is a high-performance 2.3 inch TFT LCD module engineered for demanding industrial applications. Featuring a transmissive display with 320 × 240 RGB resolution, this module delivers sharp, vibrant visuals with 65K colors and a high 500:1 contrast ratio for excellent readability. As a professional manufacturer and supplier of TFT modules in China, Victronix 2.3 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 4.3 inch 480x272 Wide Temperature TFT Module is a high-performance 4.3 inch TFT LCD module engineered for demanding industrial applications. Combining a 480 × 272 RGB resolution panel, 16.7M color depth, and an ultra-wide operating temperature range (-30°C to +80°C), this module delivers exceptional visual clarity and reliability in harsh environments. Integrated with an ST7283-G4 controller and 16-LED backlight, it meets ROHS compliance for eco-friendly deployment. As a professional manufacturer and supplier of TFT modules in China, Victronix 4.3 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT121QXHA-01 is a 12.1-inch TFT module with 1024 x 768 pixels, and it is the only 4:3 panel in our 12.1-inch range — the other two are 1280 x 800. That matters because XGA in a 4:3 layout is what a very large installed base of industrial controllers, medical instruments and test equipment was designed around, and it remains the usual target when a display in existing hardware has to be replaced. The active area is 245.76 x 184.32 mm with pixels that are square to ten decimal places, so circles and dial scales stay true. Brightness is 1000 cd/m², the highest figure we publish in this size, and the viewing angle is 85° in all four directions with no stated best direction. The interface is 4-lane LVDS on a 20-pin connector, and it runs from a single 3.3 V rail — no separate gate or analogue supplies to generate. We are equally direct about what this module demands and what is not yet documented: the backlight draws about 14 W, which is over 90% of the module's total power and needs a real thermal plan; brightness and viewing angle are given as typical values without stated minimums; and the driver IC, outline dimensions and LVDS data mapping are not in the file we hold.

This Victronix 3.5 inch 320x480 IPS TFT Module with CTP is a high-performance 3.5 inch IPS TFT LCD module with integrated capacitive touch panel (CTP), designed and manufactured by Victronix Tecenstar. The Victronix 3.5inch TFT module combines a 320×480 pixels resolution display and a 16.7M full-color display with IPS technology, it ensures crisp visuals optimized for a full 80° viewing angle viewing angle. As a professional TFT module manufacturer and supplier in China, this Victronix 3.5inch TFT Module uses ILI9488 display controller and GT911 touch controller support RGB interface and I²C touch communication to meet customers' requirements.

The Victronix VXT700SWHW-01 is rated to +85°C, and down to -30°C — a 15°C wider window at the top and 10°C at the bottom than the usual industrial range. That difference is what lets a display live in a sealed enclosure under a hot roof, next to a power stage, or in a vehicle parked in direct sun, without a heater or a fan. Helping it along is a genuinely low power draw: just 100 mA typical at 3.3 V, about 0.33 W for the panel logic, so the module adds little heat of its own to an already hot box. The 800 x 480 panel uses square 0.1905 mm pixels for undistorted graphics, connects over single-channel LVDS on a compact 20-pin I-PEX or JAE connector, and offers MODE (6/8-bit) and SC (scan direction) control pins plus a separate 6-pin backlight connector with BLEN enable and VPDIM PWM dimming.