China 480x272 resistive touch display Manufacturer, Supplier, Factory

This Victronix 3.5'' 320x480 Capacitive Touch TFT Module is a high-performance 3.5 inch TFT-LCD module integrating capacitive touch technology. Featuring a sharp 320×480 resolution (48.96×73.44 mm active area) and 16.7 million colors, this module delivers vibrant visuals with a typical brightness of 300 cd/m² and wide 80° viewing angles in all directions. As a professional manufacturer and supplier of TFT modules in China, Victronix 3.5 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 5 inch Sunlight Readable TFT Module is a high-performance 5 inch display solution engineered for outdoor and industrial applications. Featuring a 640×480 resolution active area (101.57×76.18 mm) with 16.7 million colors and RGB888 interface, this RoHS-compliant module delivers exceptional visual clarity and reliability.

The VXT430GWH-02 is a 4.3-inch IPS TFT module in portrait orientation: 480 x 800 pixels over an active area of 56.16 x 93.60 mm, taller than wide, with a diagonal of 4.2975 inches. It is the only portrait module and the only IPS module in our 4.3-inch range. Being IPS means viewing angle is 80° typical in all four directions with no preferred direction and no gray scale inversion to design around — decide orientation on mechanical grounds alone. Pixel pitch is 0.117 mm square, giving 217 PPI, so small text stays legible and circular graphics need no correction. It runs 24-bit RGB over a 42-pin connector driven by an HX8369A, with a serial port on the same connector for configuration. Brightness is 310 minimum, 350 typical and 390 maximum cd/m² — the lowest in the family and intended for indoor and handheld use, published as a complete range you can design and inspect against. At 2.15 mm it is also the thinnest 4.3-inch module we offer.

The VXT350HQS-01X-W is a 3.5-inch TFT LCD module with 320x240 QVGA resolution and an anti-glare top polarizer — the only module in our range that specifies one. Combined with all-direction viewing and no grayscale inversion, it stays readable wherever the operator stands and wherever the light comes from, without spending brightness or backlight life on the problem. Rated -30 to +85°C, with 24-bit RGB for video and a separate SPI channel for configuration.

This Victronix 3.5 inch 320x480 IPS TFT Module with CTP is a high-performance 3.5 inch IPS TFT LCD module with integrated capacitive touch panel (CTP), designed and manufactured by Victronix Tecenstar. The Victronix 3.5inch TFT module combines a 320×480 pixels resolution display and a 16.7M full-color display with IPS technology, it ensures crisp visuals optimized for a full 80° viewing angle viewing angle. As a professional TFT module manufacturer and supplier in China, this Victronix 3.5inch TFT Module uses ILI9488 display controller and GT911 touch controller support RGB interface and I²C touch communication to meet customers' requirements.

The VXT700BAHA-01CA brings color graphics and capacitive touch to compact equipment panels. Its LVDS display connection and I2C touch interface support host-controlled menus, settings and status screens in a single front-panel assembly.