China 480x800 TFT LCD panel Manufacturer, Supplier, Factory

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 7 inch Equivalent of innolux LW700AT9309 is a high-performance 7 inch TFT LCD module engineered by Victronix for demanding industrial applications. Featuring an 800 × 480 (WVGA) resolution with 262K colors, this display delivers crisp visuals with a pixel pitch of 0.1905 × 0.1905 mm across its 152.4 × 91.44 mm active area. Encased in a compact 165.0 × 104.54 × 5.2 mm (W×H×T) design, it integrates seamlessly into embedded systems.

This Victronix 3.5'' 480x800 IPS Resistive Touch TFT Module is a robust 3.5 inch TFT LCD module engineered for demanding industrial applications. Combining exceptional optical performance with reliable resistive touch technology, this module delivers a premium visual interface solution. As a leading manufacturer and supplier of TFT modules in China, the Victronix 3.5 inch TFT module strictly complies with ROHS environmental standards to ensure excellent application performance. We offer a customized service to meet the needs of our customers.

This Victronix 7 inch 800x1280 MIPI IPS TFT Module is a high-resolution 7-inch TFT LCD module engineered for demanding environments. Featuring an 800×(RGB) ×1280 pixel resolution and a crisp 150.72 × 94.2 mm active area, this display delivers exceptional visual clarity with a pixel density of 0.11775 mm. As a professional TFT module manufacturer and supplier in China, this Victronix 7 inch TFT Module is strictly compliant with the ROHS environmental standards to provide superior application performance. We offer a customized service to meet the needs of our customers.

The VXT104QXHA-02-B is a 10.4-inch TFT LCD module with 1024 x 768 XGA resolution and an HDMI input — the first HDMI module in our range, and the difference is the point. Every other module we sell is a component you have to drive: your processor needs the right peripheral, your firmware needs an initialisation sequence, your board needs a frame buffer, and your power design needs the sequencing right. This one includes the driver PCBA, so it takes HDMI from a single-board computer, an industrial PC, a media player or a laptop and shows a picture. There is no display interface to design and no 1.5 MB of frame memory to find in your host. It is also the easy answer when an old XGA panel fails: you do not have to reproduce the original interface, just feed it HDMI from the new computer. Power comes from a 12 V DC jack or 5 V over the HDMI connector, with the jack recommended because no input current is published. Brightness is 600 cd/m² with contrast at 600 minimum and 800 typical, viewing angle 80° in all four directions, and pixels square to within 0.002% so circles need no correction. We are equally plain about what the document does not settle: no LED forward voltage or backlight power, no input current, brightness and viewing angle carry typical values with no minimums, the supported HDMI video modes are not listed, and the outline drawing is missing from the file.

The Victronix VXT700WRA-01 is a 7.0-inch TFT LCD module with 800 x 480 pixel resolution and support for up to 16.7M colors, built for embedded and industrial equipment that needs a compact, easy-to-drive display. Its 24-bit parallel RGB interface with DE (data enable) and DCLK lets most mainstream MCUs and MPUs — STM32, NXP i.MX, Allwinner, Rockchip and similar — drive the panel directly from their on-chip LCD controller, with no LVDS serializer or bridge chip and no extra BOM cost. The module runs from a single 3.3 V logic supply, uses an RM53052 / RM57452 driver IC, and is rated for a -20°C to +70°C operating range, so it works in unheated enclosures and outdoor cabinets.

The VXT430BPI-01ND is a 4.3-inch 480x272 industrial TFT LCD module with a standard RGB interface and ILI6485 controller. It delivers 16.7M colors, 300 cd/m2 brightness, a 700:1 contrast ratio and a 20 ms response time, backed by a 7S1P white LED backlight rated for 30,000 to 50,000 hours. Operating from -20°C to +70°C and RoHS compliant, it is built for industrial HMIs, automotive dashboards and medical monitoring devices. Custom FPC, touch panel and cover glass are available.