China 6.2 inch WVGA display Manufacturer, Supplier, Factory

This Victronix 3.5 inch HVGA TFT Module is a high-reliability 3.5 inch TFT LCD module engineered for demanding industrial applications. Featuring a 320(RGB) × 480 (HVGA) resolution and 500:1 contrast ratio, this transmissive display delivers sharp visuals with an active area of 48.96 × 73.44 mm. Its 0.184 × 0.184 mm pixel pitch ensures exceptional detail clarity. As a professional manufacturer and supplier of TFT modules in China, Victronix 3.5 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT350CQH-05 is a 3.5-inch 320 x 240 QVGA TFT LCD module, and two things about it are worth knowing before anything else. It is 3.2 mm thick, the thinnest module in this range on the same 76.90 x 63.90 mm footprint, and it carries no touch panel - so if your product has a separate touch solution, or none, you are not paying for one. The backlight is confirmed twice over: the mechanical drawing shows the LED circuit as six dies in one string from LEDA to LEDK, and 19.2 V over six gives exactly 3.20 V per LED, while the stated 0.384 W matches 19.2 V x 20 mA exactly. Response time is also better documented than usual, with both Ton and Toff published and floors on each - 15 and 30 ms on, 35 and 50 ms off - and contrast carries a 200 minimum. Two things need settling before you commit. This is a TN panel: the specification states a 12 o'clock viewing direction with grey-scale inversion at 6 o'clock, and vertical angles of 50 and 60 degrees, so mounting orientation has a right answer - if your product is handheld and the orientation is not under your control, ask us about a panel with no preferred direction. And the timing chapter runs three pages and is published entirely as diagrams, with a note saying the sequences are for reference only and referring you to the HX8238D data sheet, so there is nothing in this document to configure a controller from.

The VXT350MLH-03P is a 3.5-inch 320 x 240 TFT LCD module with a 4-wire resistive touch panel, and resistive sensing works with gloves, wet hands or a stylus. The brightness 200 cd/m2 minimum with the touch panel fitted, contrast 300 minimum and NTSC 50% minimum - and because brightness is also published without the touch panel at 300 cd/m2

The VXT430HNS-01-W is a 4.3-inch transmissive TFT module with 480 x 272 resolution, an anti-glare polarizer, and an operating range of -30 to +85°C, without touch. Its most useful property only appears when you compare it with a sibling: it shares the mechanical envelope, connector and pin-out of the VXT430HWE-03-W, which is the same module at 800 x 480 — same outline, same 40-pin assignment, same contrast and viewing angle — with one third the frame buffer at 255 KB. That makes resolution a choice you can defer rather than a decision that locks your mechanics. Pixels are exactly square at 0.198 x 0.198 mm, so circles, dials and round indicators need no artwork correction. Brightness is given as 440 minimum, 550 typical and 660 maximum, with contrast at 640 minimum and 800 typical. Reliability covers ten tests including vibration and 60 G shock, with MTBF of 50,000 hours. Two gaps are stated plainly: logic supply current is not published, and storage temperature is not wider than operating.

The CTP-VX215A5698-GG is a 21.5-inch capacitive touch panel in G+G construction, sized for 1920x1080 displays and for the enclosures, VESA mounts and kiosk cabinets already built around that format. It adds touch to an existing panel instead of replacing the whole assembly. Transmittance is at least 85% with ≥6H surface hardness, response is ≤12 ms, and it runs from 2.8 to 3.3 V. Suited to kiosks, POS, industrial HMI and education displays, and to retrofitting touch onto existing 21.5-inch hardware.

The Victronix VXT121BIHA-01 is a 12.1-inch WXGA (1280 x RGB x 800) IPS TFT LCD module designed for equipment that must stay readable in bright ambient light and keep running in harsh environments. Its IPS cell delivers stable color and contrast from every viewing direction with no grayscale inversion, while the 800 cd/m² high-brightness backlight keeps the screen legible under indirect and direct sunlight. The module fits industrial HMI panels, outdoor kiosks, EV charging piles, marine instruments, medical devices and agricultural machinery. Touch panels, cover glass, optical bonding and interface converter boards are available on request.