China 640x480 landscape display Manufacturer, Supplier, Factory

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 3.5'' 320x480 IPS TFT Module is a high-quality 3.5 inch TFT LCD module engineered for demanding industrial and embedded applications. Featuring a 320 × 480 RGB resolution with 262K colors, this transflective display delivers sharp visuals with a pixel pitch of 0.153 × 0.153 mm across an active area of 48.96 × 73.44 mm.

This Victronix 3.5'' 480x640 TN TFT Module is a high-reliability 3.5 inch TFT LCD module engineered for demanding industrial applications. Featuring a 480(RGB) × 640 resolution and 262K color depth, this transmissive display delivers sharp visuals with an active area of 53.28 × 71.04 mm. It's 0.111 × 0.111 mm pixel pitch ensures exceptional detail clarity. As a professional manufacturer and supplier of TFT modules in China, Victronix 3.5 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT350CHH-08C1 is a 3.5-inch 320 x 480 portrait TFT LCD module with a capacitive touch panel, G+G construction with a 0.7 mm toughened cover lens over 0.55 mm sensor glass, 1.4 mm total thickness, FT5443DQS over I2C, 2.8 to 3.3 V supply with 1.8 V IO, 85% minimum light transmittance, 6H surface hardness, 0.25 J impact energy and 5 touch points. Brightness is the other strong figure: 600 cd/m2 typical with a stated minimum of 480 and a stated maximum of 720, so you get a floor to hold us to and a ceiling that shows the production spread. And the backlight reconciles: 19.2 V over the six dies the block diagram states gives exactly 3.20 V per LED, and the stated 0.768 W matches 19.2 V x 40 mA exactly.

Victronix VXT430TWH-06P is a 4.3-inch TFT LCD module in portrait, and it carries a four-wire resistive touch panel. That combination is easy to overlook and hard to replace. A resistive panel responds to pressure rather than to a finger's conductivity, so it works with gloves, wet or oily hands, a stylus, or the tip of a tool, and it costs less than a capacitive stack — at the price of multi-touch, of 80% transmittance against the 85% a capacitive panel gives, and of a surface that takes a deliberate press. The shape suits a vertical column: the active area is taller than it is wide, so readings stack one per row, scrolling lists and status panels fit naturally, and a portrait enclosure needs no rework. The display itself runs 24-bit RGB on a 40-pin FPC from a single 3.3 V rail, and 130,560 pixels need only 255 KB of frame buffer — small enough that a microcontroller with 512 KB of internal SRAM needs no external RAM at all. Most optical figures carry a stated floor: 310 cd/m² minimum brightness, 400 minimum contrast, 80° minimum viewing angle. Two things want settling before you commit, and we set them out rather than leave them for bring-up: the specification writes the resolution as 480 × 272 while the geometry says the panel is 272 wide by 480 tall, and the driver IC is named two different ways in two different places.

The VXT500BKI-01F is a 5.0-inch TFT LCD module with 720 x 1280 pixels in portrait - HD resolution on a five-inch panel, and one of the highest pixel densities in our range. The pixels are square: 0.08625 mm on both axes, which is exactly what 62.1 mm over 720 pixels and 110.4 mm over 1280 pixels both give, and the shape is an exact 16:9 turned on its side. Brightness is 680 cd/m2 minimum against 850 typical, contrast 1000:1 minimum, and viewing angle 70 degrees minimum in all four directions with no preferred orientation, so how you mount it is a mechanical decision rather than an optical one. Touch is five-point capacitive in a G+G stack rated at 6H and 85% transparency, on its own 7-pin I2C connector. The display runs four MIPI lanes from a single 2.8 V rail, and both the logic current and the backlight power are published, so the total draw can be worked out at roughly 0.93 W.

The CTP-T350GF-08 is a 3.5-inch capacitive touch panel in G+F construction — the only film-sensor panel in our range, and the only one with a six-pin FPC. Its ITO film sensor is 0.125 mm against 0.55 mm for glass, so the stack is thinner and lighter even behind a 1.1 mm cover glass. It reports a single touch point, which suits button and menu interfaces rather than gestures. Rated -20 to +70°C with ±8 kV air-discharge ESD. Built for appliance controls, elevator panels, thermostats and simple HMI.