China 800x600 TFT LCD display Manufacturer, Supplier, Factory

This Victronix 2.6 inch Resistive Touch IPS TFT Module. Featuring 280 cd/m² brightness (max 340 cd/m²), 500:1 contrast ratio, and anti-glare polarizer, this display ensures sunlight-readable clarity and true-color reproduction (CIE white point: x=0.288, y=0.325).

The VXT104QXHA-02-B is a 10.4-inch TFT LCD module with 1024 x 768 XGA resolution and an HDMI input — the first HDMI module in our range, and the difference is the point. Every other module we sell is a component you have to drive: your processor needs the right peripheral, your firmware needs an initialisation sequence, your board needs a frame buffer, and your power design needs the sequencing right. This one includes the driver PCBA, so it takes HDMI from a single-board computer, an industrial PC, a media player or a laptop and shows a picture. There is no display interface to design and no 1.5 MB of frame memory to find in your host. It is also the easy answer when an old XGA panel fails: you do not have to reproduce the original interface, just feed it HDMI from the new computer. Power comes from a 12 V DC jack or 5 V over the HDMI connector, with the jack recommended because no input current is published. Brightness is 600 cd/m² with contrast at 600 minimum and 800 typical, viewing angle 80° in all four directions, and pixels square to within 0.002% so circles need no correction. We are equally plain about what the document does not settle: no LED forward voltage or backlight power, no input current, brightness and viewing angle carry typical values with no minimums, the supported HDMI video modes are not listed, and the outline drawing is missing from the file.

The VXT430HNS-01-W is a 4.3-inch transmissive TFT module with 480 x 272 resolution, an anti-glare polarizer, and an operating range of -30 to +85°C, without touch. Its most useful property only appears when you compare it with a sibling: it shares the mechanical envelope, connector and pin-out of the VXT430HWE-03-W, which is the same module at 800 x 480 — same outline, same 40-pin assignment, same contrast and viewing angle — with one third the frame buffer at 255 KB. That makes resolution a choice you can defer rather than a decision that locks your mechanics. Pixels are exactly square at 0.198 x 0.198 mm, so circles, dials and round indicators need no artwork correction. Brightness is given as 440 minimum, 550 typical and 660 maximum, with contrast at 640 minimum and 800 typical. Reliability covers ten tests including vibration and 60 G shock, with MTBF of 50,000 hours. Two gaps are stated plainly: logic supply current is not published, and storage temperature is not wider than operating.

The CTP-T700GF-05 is a 7-inch capacitive touch panel in G+G construction with ten-point touch on an eight-pin FPC — the smallest connector in our range, and the only panel whose pin-out runs cleanly from ground and supply through I2C, reset and interrupt without empty positions in between. It uses an FT5446 controller and reaches ten points on a 0.7 mm cover glass, so multi-user operation does not cost you thickness. Suited to industrial HMI, portable terminals, collaborative interfaces and compact enclosures.

The Victronix VXT121BIHA-01 is a 12.1-inch WXGA (1280 x RGB x 800) IPS TFT LCD module designed for equipment that must stay readable in bright ambient light and keep running in harsh environments. Its IPS cell delivers stable color and contrast from every viewing direction with no grayscale inversion, while the 800 cd/m² high-brightness backlight keeps the screen legible under indirect and direct sunlight.

The VXT430HPWA-03C is a 4.3-inch TFT LCD module with 480x272 resolution and integrated capacitive touch, wired as two independent subsystems: the display runs on its own 40-pin interface and VDD rail, while the FT5446 touch controller has a separate 6-pin FPC and its own VDD-CTP supply. That lets you power the display down and keep touch alive, or reset touch without touching the display. Rated 850 cd/m² and -30 to +85°C, it suits outdoor handheld terminals, field instruments and portable equipment.