China LVDS interface 7 inch TFT module Manufacturer, Supplier, Factory

This 3.5 inch TFT display VXT350CHH-01P by Victronix is commonly used in Industrial HMIs & Control Panels, Medical Devices, Portable Test Equipment, Automotive Diagnostics, and IoT Edge Devices.

The VXT101YIA-19C is a 10.1-inch TFT LCD module with 800 x 1280 pixels, and the shape is what sets it apart: this is the only portrait panel in our 10.1-inch range, where the others are 1280 x 800 landscape. Its active area of 135.36 x 216.58 mm is taller than it is wide by an exact 1.6 to 1, so content stacks vertically the way a phone screen does — readings, lists and status panels one row at a time — and it drops into enclosures cut for portrait without rotating the design. Touch is a ten-point projected capacitive panel on an ILI2511 controller, specified at 6H surface hardness, 85% transparency and accuracy of ±1.5 mm at centre rising to ±2.5 mm at the edges, which is the pair of numbers you actually need when deciding how far from the bezel a button may sit. The display runs on an ILI9881C over four MIPI lanes, the pixels are square to within 0.002% so circles need no correction, and contrast carries a stated 800 minimum. One feature is worth calling out: pin 27 outputs a CABC PWM signal, meaning the module can dim its own backlight from picture content rather than asking your processor to do it. We are equally direct about the limits. The operating range is -10 to +50 °C, narrower than most panels in our range and the first thing to check if your product sits in a hot enclosure or a vehicle. Brightness is 250 cd/m² typical with no stated minimum. Reliability runs six tests at 96 hours with no ESD, vibration, shock or MTBF, and the outline drawing is not dimensioned in this file.

The VXTA40CAH-01 is a 10.4-inch TFT in 4:3 — the format industrial and medical equipment has been built around for twenty years. Its active area of 211.2 x 158.4 mm is the standard 10.4-inch size, so it drops into a cutout originally cut for a panel of this class, and legacy software written for 800x600 does not letterbox. It is bright at 650 cd/m² typical with a 520 minimum, uses an anti-glare polarizer for factory lighting, and ships without touch so it pairs directly with our 10.4-inch capacitive touch panel. The documentation is also unusually complete: ten reliability test items each citing its IEC and GB standard, a 50,000-hour MTBF, and inspection criteria given in millimetres. 24-bit RGB on 60 pins, -20 to +70°C.

The VXT016VCSA-01 is a 1.6-inch round TFT module with a QSPI interface — the only module in our range with a four-lane serial pixel bus. Small round displays usually want a serial interface because pins are scarce, but 400x400 is 160,000 pixels and single-lane SPI struggles to move a full frame; QSPI carries four bits per clock, roughly four times the throughput at 62.5 MHz, while still using only four data pins. It is also the smallest and densest panel we make at 1.6 inches and 255 PPI with square pixels. ST77903, 16.7M colours, 3.0 V backlight needing no boost, -20 to +70°C.

The CTP-VX238B5696-GG is a 23.8-inch capacitive touch panel in G+G construction, supplied as a standalone component for bonding to a display. It is offered with either AGC or Corning cover glass, and the difference is measurable — Corning withstands roughly two and a half to three times the impact energy in drop-ball testing. Transmittance is at least 85% with ≥6H surface hardness, response is ≤12 ms, and it runs from 2.8 to 3.3 V. Built for kiosks, interactive displays, POS and self-service terminals.

This Victronix 2.8inch 240*320 Projected capacitive touch IPS TFT Module combines a bright 240×320 IPS TFT panel (16.7M colors, 800 cd/m² brightness) with advanced 5-finger projected capacitive touch (≥6H hardness, ≥85% transparency). As a professional TFT module manufacturer and supplier in China, this Victronix 2.8inch TFT Module uses an industrial-grade design to provide superior application performance.