China LVDS interface TFT display Manufacturer, Supplier, Factory

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 6.2 inch 800×480 TFT Module is a high-performance 6.2 inch 800x480 TFT Module designed for industrial and embedded applications requiring reliable visual clarity. Featuring an 800×480 RGB resolution and a compact form factor (155.2 × 88.2 × 5.0 mm), this module delivers sharp imagery with wide viewing angles and robust environmental tolerance.

The VXT320HQS-02P is a 3.2inch, 240x320 portrait mode TFT LCD display module with a resistive touch panel (RTP). It features a resolution of 240x320 dots and a brightness of 300 cd/nits (typical value), with a contrast ratio of 500:1 (typical value). Equipped with a built-in ILI9341 driver IC, it supports 8080 MCU 8-bit/16-bit SPI (3-Wire/4-Wire) interfaces. The module measures 55.94mm (W) x 77.60mm (H), with an active area size of 48.6 x 64.8 mm. It functions efficiently within a temperature range of -20℃ to +70℃, while its storage capabilities extend from -30℃ to +80℃. If customers require a high brightness backlight, please contact us for custom solution.

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 3.5 inch Tianma Panel RTP TFT module is a durable 3.5 inch TFT LCD module designed for demanding embedded applications. Combining a bright transmissive display with integrated resistive touch technology, this module delivers exceptional optical performance and reliability in a compact form factor (76.90 × 63.90 × 4.15 mm).

The VXT350MHSA-08 is a 3.5-inch portrait TFT module: 320 x 480 pixels over an active area of 48.96 x 73.44 mm, in a true 2:3 shape. What distinguishes it is how many ways it can be driven — RGB parallel, 3-wire SPI, 4-wire SPI and 8080-style MCU parallel all sit on one 50-pin connector, selected by three pins, IM0, IM1 and IM2, read at power-up. That means the interface stops being a decision you must make before choosing a display: you can prototype on SPI and move to RGB when you need the refresh rate, without changing the module, the connector or the enclosure. Driven by an ST7796U, it also runs its 3.0 V backlight with no boost converter — no inductor, no switching noise — unlike the other 3.5-inch modules in the range which need 18 to 19 V. Contrast is given as an 800:1 minimum, viewing angle is 80° in all four directions with viewing direction ALL, and total consumption is about 0.41 W from a measured 19.51 mA of logic current.

The VXO-095AMA-107 is a 0.95-inch AMOLED in a 1:2 portrait format — the only display in our range shaped for a band rather than a watch. Its active area is 10.8 x 21.6 mm, exactly twice as tall as wide, which is the geometry a fitness band needs: it fits the strap, not a round case. It is also the smallest display we make, and it integrates touch with its own supply rail. Like our 1.19-inch AMOLED it has no backlight, giving 80,000:1 contrast, and it is brighter and faster — 450 cd/m² and 60 Hz against 350 and 45. About 0.055 W at full white, 0.1 µA deep standby. RM69310, SPI, -20 to +70°C.

The Victronix VXT700WRA-01 is a 7.0-inch TFT LCD module with 800 x 480 pixel resolution and support for up to 16.7M colors, built for embedded and industrial equipment that needs a compact, easy-to-drive display. Its 24-bit parallel RGB interface with DE (data enable) and DCLK lets most mainstream MCUs and MPUs — STM32, NXP i.MX, Allwinner, Rockchip and similar — drive the panel directly from their on-chip LCD controller, with no LVDS serializer or bridge chip and no extra BOM cost. The module runs from a single 3.3 V logic supply, uses an RM53052 / RM57452 driver IC, and is rated for a -20°C to +70°C operating range, so it works in unheated enclosures and outdoor cabinets.