China QSPI TFT LCD module Manufacturer, Supplier, Factory

This Victronix 5 inch Capacitive Touch TFT Module is a high-performance 5 inch TFT-LCD module integrating a capacitive touch panel (CTP), designed for industrial HMI, embedded systems, and interactive applications. Combining an 800 × 480 RGB pixel display, 16.7M color depth, and robust environmental compliance, this RoHS-certified module delivers exceptional clarity and reliability. As a professional manufacturer and supplier of TFT modules in China, Victronix 5 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 2 inch 240x320 SPI TFT Module is a compact 2.0 inch TFT LCD module engineered for embedded systems requiring reliable visual performance. Featuring a 240×320 RGB resolution on a 30.6 × 40.80 mm active area, this module delivers sharp, vibrant images with a pixel pitch of 0.1275 × 0.1275 mm. As a professional manufacturer and supplier of TFT modules in China, Victronix 2 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 3.95 inch 480x480 IPS TFT Module is a high-performance 3.95 inch TFT LCD module designed for demanding industrial applications. With a resolution of 480×480 and a compact active area of 71.856 × 70.176 mm, this display features 262K colors, 400 cd/m² typical brightness, and an 800:1 typical contrast ratio to deliver outstanding visual clarity.

The VXT620HWI-01 is a 6.2-inch TFT LCD module with 800 x 480 WVGA pixels on a 24-bit parallel RGB interface, and its most useful property is not a headline number but how the optical table is written. Luminance is given as 400 minimum, 500 typical and 600 maximum. Contrast carries a 480 minimum against 600 typical. Uniformity is 70% minimum. The module runs on an ILI6123H and ILI5480. Ratings are -20 to +70 °C, and reliability runs 240 hours per condition with 100 thermal shock cycles and 100 G mechanical shock.

The VXTA10BXH-01C is a 10.1-inch 1280x800 TFT with an integrated capacitive touch panel, driven over 4-lane MIPI DSI. Against our 10.4-inch 800x600 module it carries 2.1 times the pixels through 35% fewer pins — 39 instead of 60, and 32 functional instead of 43 — because four differential pairs move the whole image. Touch is on the module with an FT5426, so there is no separate flex to route. The backlight has PWM in and PWM out, so dimming is handled on the module rather than in your firmware. It is 16:10 at 150 PPI, anti-glare, with 80° viewing in all four directions and no gray scale inversion — together the signature of an IPS cell. Contrast is 700 minimum. The document has real problems, listed here: an active-area figure that does not reconcile, a touch controller with no I2C pins, and a brightness figure with no minimum.

The VXT350FPQI-01 is a transflective, sunlight readable 3.5-inch TFT module for equipment that moves between indoor and outdoor light. Outdoors it reads by reflected light, and the backlight can be switched off entirely rather than merely dimmed, removing the largest load in the module. It is the third transflective panel in our range and the only one you can drive over a 3-wire SPI from an ordinary microcontroller — 240x320 portrait, square pixels, ILI9341V, 0.384 W backlight. Rated -20 to +70°C with ±8 kV air ESD.