China ST7272A TFT display Manufacturer, Supplier, Factory

This Victronix 5.7 inch 640x480 IPS TFT Module is a high-performance 5.7 inch TFT-LCD module engineered for demanding industrial applications. Featuring an IPS panel with 640×480 resolution and 16.7 million color depth, this RoHS-compliant solution integrates an LCD panel, driver IC (JD9168S), FPC, and LED backlight into a ruggedized package. As a professional manufacturer and supplier of TFT modules in China, Victronix 5.7 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

Victronix VXT700WHA-04: a high brightness wide temperature 7.0-inch 800 x 480 TFT LCD module, and two numbers define it. It delivers 1000 cd/m2 typical surface luminance from a 27-LED backlight at 27 V and 180 mA for the stated 4.86 W, putting it in daylight-readable territory, and it carries an operating range of -30 to +85 C with storage at -40 to +90 C. Driven by HX5281 over LVDS on a 40-pin 0.5 mm Hirose FH52-40S-0.5SH connector, it is transmissive and normally black with an ALL viewing direction, 16.7M colours, contrast 800 minimum and 1400 typical, response 25 ms typical and 35 ms maximum, uniformity 80 per cent minimum. ESD is the strongest in the range at 8 kV contact and 15 kV air. Brightness is stated at 1000-1100cd/m2.

The VXT350CHH-08C1 is a 3.5-inch 320 x 480 portrait TFT LCD module with a capacitive touch panel, G+G construction with a 0.7 mm toughened cover lens over 0.55 mm sensor glass, 1.4 mm total thickness, FT5443DQS over I2C, 2.8 to 3.3 V supply with 1.8 V IO, 85% minimum light transmittance, 6H surface hardness, 0.25 J impact energy and 5 touch points. Brightness is the other strong figure: 600 cd/m2 typical with a stated minimum of 480 and a stated maximum of 720, so you get a floor to hold us to and a ceiling that shows the production spread. And the backlight reconciles: 19.2 V over the six dies the block diagram states gives exactly 3.20 V per LED, and the stated 0.768 W matches 19.2 V x 40 mA exactly.

The VXT430INS-15 is a 4.3-inch 480 x 272 TFT LCD module built for products that get knocked about. Its reliability programme runs ten tests at 240 hours and includes the three most often missing at this size - 60 G mechanical shock on six faces, 6 hours of vibration across three axes, and ESD at 8 kV air and 4 kV contact - which is what makes it a panel for vehicles, mobile equipment and machine control rather than for a bench instrument. Brightness is quoted with a floor you can enforce at incoming inspection and a ceiling that shows the spread across a shipment, and both are rare at any price. Two things decide whether it suits your product. It is a TN panel: the specification states a 12 o'clock viewing direction, grey-scale inversion at 6 o'clock and unequal vertical angles, so do not mount it where the operator looks up at it - if your orientation is not under your control, an all-direction panel in this size is the better buy and we will say so. And the timing chapter is published only as diagrams, so ask us for the clock frequency and the porch values before you configure a controller.

The VXT620HWI-01 is a 6.2-inch TFT LCD module with 800 x 480 WVGA pixels on a 24-bit parallel RGB interface, and its most useful property is not a headline number but how the optical table is written. Luminance is given as 400 minimum, 500 typical and 600 maximum. Contrast carries a 480 minimum against 600 typical. Uniformity is 70% minimum. The module runs on an ILI6123H and ILI5480. Ratings are -20 to +70 °C, and reliability runs 240 hours per condition with 100 thermal shock cycles and 100 G mechanical shock.

The CTP-VX121B5563-GG is a 12.1-inch capacitive touch panel in G+G construction with a 1.8 mm cover glass — the thickest in our range, about 1.6 times the usual 1.1 mm — bonded to the sensor with 0.2 mm SCA rather than a foam gasket. That combination is built for unattended and high-abuse installations. Transmittance is at least 85% with ≥6H hardness, and the total stack is 2.7 mm. Suited to industrial HMI, outdoor kiosks, transport terminals and medical equipment.