China TFT display with SPI interface Manufacturer, Supplier, Factory

The VXT430MPIA-03C is a 4.3-inch TFT module with a five-point capacitive touch panel bonded on: a 480 x 272 RGB display and an I2C touch controller in one assembly. What sets it apart is practical rather than headline — this is the 4.3-inch module whose power you can actually budget, because it publishes a logic current of 22 mA where the sibling module rated identically leaves it as TBD. Total draw is about 0.67 W, the lowest of any 4.3-inch module we offer with touch. It is also unusually complete on the touch side: accuracy of ±1.5 mm at the centre and ±2.5 mm at the edge, surface hardness of at least 7H, and transparency of at least 85% are all given as numbers. Contrast is 800:1 minimum with 80° viewing in all four directions. Two things need attention before ordering, and both are stated here: the module matches a sibling part on every comparable figure apart from the driver IC, and its reliability programme is shorter than the rest of the range.

This Victronix 4.3 inch 480x272 IPS TFT Module with CTP is a high-performance 4.3-inch TFT LCD module designed for demanding embedded and industrial applications. Combining a bright display with responsive multi-touch functionality, this module delivers exceptional visual clarity and user interaction in a compact form factor.

Where a display can be mounted is usually decided by mechanics, then corrected in software. The Victronix VXT700KWSA-01 removes that second step. Two dedicated pins — L/R on pin 33 and U/D on pin 34 — flip the image horizontally and vertically in hardware, so the same module works upright, upside down, behind a mirror, or viewed through a periscope without touching a line of framebuffer code or paying the performance cost of software rotation. The 7.0-inch 800x480 panel runs on an ST7277 driver over single-channel LVDS on a 40-pin connector, brightness is controlled by a dedicated LED_PWM pin, and STBYB puts the panel into standby for power-sensitive products.

The VXT177SSI-02 brings color graphics to compact equipment with a 1.77-inch TFT display and an 8-bit MCU interface. Its small footprint provides an option for handheld instruments, portable devices and simple menu-based control panels.

The VXT700BAHA-01CA brings color graphics and capacitive touch to compact equipment panels. Its LVDS display connection and I2C touch interface support host-controlled menus, settings and status screens in a single front-panel assembly.

The VXT430HPWA-03C is a 4.3-inch TFT LCD module with 480x272 resolution and integrated capacitive touch, wired as two independent subsystems: the display runs on its own 40-pin interface and VDD rail, while the FT5446 touch controller has a separate 6-pin FPC and its own VDD-CTP supply. That lets you power the display down and keep touch alive, or reset touch without touching the display. Rated 850 cd/m² and -30 to +85°C, it suits outdoor handheld terminals, field instruments and portable equipment.