China 1080x1920 TFT LCD panel Manufacturer, Supplier, Factory

This Victronix 7 inch 1024x600 IPS TFT Module is a high-quality 7 inch TFT-LCD module engineered for demanding industrial applications. Featuring an IPS panel with a sharp 1024 × 600 resolution, it delivers vibrant 16.7 million colors and wide 178° viewing angles (all directions) for consistent visual clarity. With a typical brightness of 250 cd/m² and 800:1 contrast ratio, this display ensures readability in diverse lighting conditions. As a professional manufacturer and supplier of TFT modules in China, Victronix 7 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 7 inch 800x480 Capacitive Touch TFT Module is a high-performance 7 inch TFT LCD module designed for industrial embedded systems. It features an 800×480 resolution screen, a capacitive touch panel (CTP), and a high-luminance backlight system within a compact form factor. As a professional manufacturer and supplier of TFT modules in China, this Victronix 7 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 2.2 inch 240x320 Capacitive Touch TFT Module is a compact 2.2 inch TFT LCD module engineered for reliable performance in demanding applications. It features a sharp 240×320 resolution (RGB) across a 33.84×45.12 mm active area. The display provides a white LED backlight, ST7789V2 IC driver, FPC connection with an 18-bit RGB interface, a 6 o'clock viewing direction, and a brightness of 330 nits. Besides, it offers a capacitive touch panel and supports multi-finger touch. This Victronix 2.2 inch display is commonly used in smart wearables, smartwatches, household appliances, toys, and medical devices.

The VXT350CQH-05 is a 3.5-inch 320 x 240 QVGA TFT LCD module, and two things about it are worth knowing before anything else. It is 3.2 mm thick, the thinnest module in this range on the same 76.90 x 63.90 mm footprint, and it carries no touch panel - so if your product has a separate touch solution, or none, you are not paying for one. The backlight is confirmed twice over: the mechanical drawing shows the LED circuit as six dies in one string from LEDA to LEDK, and 19.2 V over six gives exactly 3.20 V per LED, while the stated 0.384 W matches 19.2 V x 20 mA exactly. Response time is also better documented than usual, with both Ton and Toff published and floors on each - 15 and 30 ms on, 35 and 50 ms off - and contrast carries a 200 minimum. Two things need settling before you commit. This is a TN panel: the specification states a 12 o'clock viewing direction with grey-scale inversion at 6 o'clock, and vertical angles of 50 and 60 degrees, so mounting orientation has a right answer - if your product is handheld and the orientation is not under your control, ask us about a panel with no preferred direction. And the timing chapter runs three pages and is published entirely as diagrams, with a note saying the sequences are for reference only and referring you to the HX8238D data sheet, so there is nothing in this document to configure a controller from.

The VXTA10BXH-01C is a 10.1-inch 1280x800 TFT with an integrated capacitive touch panel, driven over 4-lane MIPI DSI. Against our 10.4-inch 800x600 module it carries 2.1 times the pixels through 35% fewer pins — 39 instead of 60, and 32 functional instead of 43 — because four differential pairs move the whole image. Touch is on the module with an FT5426, so there is no separate flex to route. The backlight has PWM in and PWM out, so dimming is handled on the module rather than in your firmware. It is 16:10 at 150 PPI, anti-glare, with 80° viewing in all four directions and no gray scale inversion — together the signature of an IPS cell. Contrast is 700 minimum. The document has real problems, listed here: an active-area figure that does not reconcile, a touch controller with no I2C pins, and a brightness figure with no minimum.

The VXT101BAHA-02C combines a 10.1 inch color TFT LCD with 5-point capacitive touch. Wide viewing angles, LVDS display input and USB or I²C touch interfaces support integration into embedded terminals and equipment control panels.