China 11.6 inch capacitive touch panel Manufacturer, Supplier, Factory

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix Transflective Segment VA LCD Module provides reliable performance and versatile display capabilities, designed to meet particular customer integration requirements. It is suitable for automation equipment and digital measuring instruments, medical measuring devices (blood pressure monitors, infusion pumps, etc.), meters, handheld devices, car dashboards and car audio systems, audio systems, coffee makers, and microwaves.

This Victronix 1.3 inch 240x240 TFT Module is a high-quality 1.3 inch diagonal active area (23.4 mm × 23.4 mm) with 240×240 RGB resolution and a fine pixel pitch of 0.0975mm, delivering crisp visuals in a space-efficient footprint (26.16 mm × 29.13 mm × 2.30 mm).

This Victronix 5.65 inch 640x480 IPS TFT Module is a high-performance 5.65 inch TFT-LCD module engineered for reliability in industrial environments. Featuring an IPS panel with 640×480 (VGA) resolution and 16.7 million colors, it delivers exceptional visual clarity with wide viewing angles of 80° (3/6/9/12 o’clock directions). As a professional manufacturer and supplier of TFT modules in China, Victronix 5.65 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT430GWH-02 is a 4.3-inch IPS TFT module in portrait orientation: 480 x 800 pixels over an active area of 56.16 x 93.60 mm, taller than wide, with a diagonal of 4.2975 inches. It is the only portrait module and the only IPS module in our 4.3-inch range. Being IPS means viewing angle is 80° typical in all four directions with no preferred direction and no gray scale inversion to design around — decide orientation on mechanical grounds alone. Pixel pitch is 0.117 mm square, giving 217 PPI, so small text stays legible and circular graphics need no correction. It runs 24-bit RGB over a 42-pin connector driven by an HX8369A, with a serial port on the same connector for configuration. Brightness is 310 minimum, 350 typical and 390 maximum cd/m² — the lowest in the family and intended for indoor and handheld use, published as a complete range you can design and inspect against. At 2.15 mm it is also the thinnest 4.3-inch module we offer.

The VXO-119AMA-044 is the first AMOLED module in our range, and that changes more than a specification line. Every other display we make is a TFT LCD with a backlight — an LED string, a driver, often a boost converter, and a brightness that fades. This panel has no backlight at all: each pixel makes its own light, so black is truly off. That gives 60,000:1 contrast, removes the largest power load in the module, and makes it thinner. It is a 1.19-inch round panel at 390x390 and 326 PPI, the sharpest we make, with four interface options — MIPI 2-lane, 3-wire SPI, 4-wire SPI and QAD-SPI — so you can bring it up on SPI and ship on MIPI. About 0.098 W at full white, 1 µA deep standby. RM69330, -20 to +70°C.

The VXT101MBAH-02 is a 10.1-inch TFT module with a 4-lane LVDS interface — the differential interface in our range. At 1024x600 with 16.7M colours, a parallel RGB bus would need around 28 signal lines switching at pixel-clock rates; LVDS carries the same payload over four data pairs and one clock pair, ten wires, with lower emissions and tolerance of real cable distance. It is a native 16:9 panel with a 222.72 x 125.28 mm active area, 380 cd/m² and 500:1 contrast. It needs five supply rails and 1.17 MB of external frame memory. Rated -20 to +70°C.