China projected capacitive touch panel 11.6 inch Manufacturer, Supplier, Factory

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 5 inch 800x480 TFT Module is a high-quality 5 inch TFT LCD module engineered by Victronix Tecenstar for industrial, medical, and embedded systems. Featuring an 800×480 resolution, 16.7M color depth, and RGB 24-bit interface, it delivers sharp visuals with wide viewing angles. Designed to withstand harsh environments, this module combines optical excellence with military-grade durability.

The VXT500BWS-03C0 is a 5.0-inch TFT LCD module with 800 x 480 pixels and a projected capacitive touch panel. Three things decide whether it suits your product. Brightness is 800 cd/m² minimum against 1000 typical — a stated floor you can hold us to, and roughly three times what our touchless 5-inch panel delivers. Viewing angle is 80° minimum in all four directions with no preferred orientation and no grey-scale inversion, so how you mount it is a mechanical decision rather than an optical one. And it shares an active area, resolution, pixel pitch and outline with our touchless 5-inch module, so an existing 5-inch 800x480 design takes it without recutting the enclosure. The display runs 24-bit RGB on a 40-pin FPC from a single 3.3 V rail, with touch on its own 10-pin I2C connector carrying reset and interrupt.

The VXT700MYIA-03C is a 7-inch front panel assembly: a display and touch stack under a custom cover glass carrying three functional openings — a camera window, a proximity sensor window and a microphone through-hole. The ink over the openings is specified with a number you can measure: visible light transmittance at 520 nm below 25%, which is what lets the proximity sensor hide behind the glass while still passing IR. Everything runs on one 40-pin flex at 0.30 mm pitch, and that flex carries the LED backlight as well, so there is one connector rather than two. The glass has an anti-fingerprint coating, there is black electromagnetic shielding on both sides, and the section gives a 2.25 mm finished stack with component height capped at 1.8 mm. This is a mechanical drawing, so the page is explicit about what is not in it: no resolution, interface, pin assignment, optical or environmental data.

The VXT101MBAH-02 is a 10.1-inch TFT module with a 4-lane LVDS interface — the differential interface in our range. At 1024x600 with 16.7M colours, a parallel RGB bus would need around 28 signal lines switching at pixel-clock rates; LVDS carries the same payload over four data pairs and one clock pair, ten wires, with lower emissions and tolerance of real cable distance. It is a native 16:9 panel with a 222.72 x 125.28 mm active area, 380 cd/m² and 500:1 contrast. It needs five supply rails and 1.17 MB of external frame memory. Rated -20 to +70°C.

The VXT350FPQI-01 is a transflective, sunlight readable 3.5-inch TFT module for equipment that moves between indoor and outdoor light. Outdoors it reads by reflected light, and the backlight can be switched off entirely rather than merely dimmed, removing the largest load in the module. It is the third transflective panel in our range and the only one you can drive over a 3-wire SPI from an ordinary microcontroller — 240x320 portrait, square pixels, ILI9341V, 0.384 W backlight. Rated -20 to +70°C with ±8 kV air ESD.

The VXT500BWEF-01 is a 5.0-inch transflective TFT LCD module with 800x480 resolution — the only transflective panel in our range. It reads in sunlight by reflecting ambient light rather than outshining it, and the backlight can be dimmed or switched off outdoors, cutting power sharply. Brightness is 200 cd/m² with 60:1 contrast and a 15 ms response, the fastest we specify. The panel is a 6 o'clock type and the logic rail runs from 2.5 V to 3.3 V. Rated -20 to +70°C.