China 12.1 inch capacitive touch panel Manufacturer, Supplier, Factory

This Victronix 4.6 inch Bar Type IPS TFT Module is a high-quality 4.6 inch TFT LCD module engineered by Victronix Tecenstar for industrial, medical, and embedded systems. It combines IPS technology with a unique bar-shaped form factor, delivering exceptional 65° viewing angles in all directions, vivid color reproduction, and consistent image clarity essential for critical monitoring. As a professional manufacturer and supplier of TFT modules in China, Victronix 4.6 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT800BYH-01 is an 8.0-inch 800 x 1280 portrait TFT LCD module driven by an HX8260 over a 4-lane MIPI DSI interface on a 24-pin FPC, and the reason a panel this size ships on 24 pins is the interface. Four differential data lanes plus one differential clock pair carry what a 24-bit parallel RGB bus would need fifty pins to carry, so a 1,024,000-pixel display fits a host with a DSI peripheral and almost no other pins to spare. It is the most portrait panel here - 800 x 1280 in a 16:10 column - with square 0.13455 mm pixels at 188.8 PPI, 16.7M colours stated outright, and a diagonal of 203.09 mm that lands within 0.05 per cent of the nominal 8.0 inch. And TE is brought out on pin 4, which is the tearing effect output: with a 2.0 MB frame buffer too big to double cheaply, being able to stay single-buffered and still write tear-free is the difference between a workable design and an expensive one. Three things need settling before you commit. The logic voltage is stated two ways and they do not agree: pin 7 is annotated IOVCC 1.8V while the electrical table's supply-voltage-for-logic row gives 2.8 V typical, and the thresholds are written as fractions of VDD without saying which rail, so a 1.8 V host is either comfortably inside or well outside depending on which figure holds. The storage temperature runs -30 to +70 against an operating range of -20 to +70, so the high end is not wider at all - storage should be wider at both ends and here it is not. And the backlight's seven-in-series array is derived rather than stated, and it puts 27 mA through each string against a 30 mA absolute maximum.

This Victronix 3.5 inch 320x480 sunlight readable TFT Module is a high-performance 3.5 inch IPS LCD module designed by Victronix to deliver exceptional clarity and reliability in challenging applications. This 3.5 inch TFT Module features a sharp 320×480 resolution and powered by the HX8357D driver to provide outstanding visual performance essential for industrial control systems. It is widely suitable for Industrial Control Systems & HMI, Video Door Phones & Security Systems, Smart Home Interfaces, GPS Navigation Devices, Camcorders & Digital Cameras, and Industrial Equipment & Instrumentation. As a professional TFT LCD manufacturer and supplier in China, this Victronix 3.5 inch TFT module strictly complies with ROHS environmental standards, ensuring excellent application performance. We offer a customized service to meet the needs of our customers.

The VXT397IWI-01P is a 3.97-inch 480 x 800 portrait TFT LCD module with a 4-wire resistive touch panel, and the touch is what distinguishes it from the other 480 x 800 panel in this size.Resistive sensing responds to pressure rather than to a finger's conductivity, so it works with gloves, wet hands, a stylus or a tool tip, which is why it is still the choice for industrial and medical equipment. The optical table is also unusually well specified: luminance carries a stated minimum of 240 and a stated maximum of 420 alongside the 300 typical, and contrast carries a 300 minimum, so there are figures you can hold us to at incoming inspection - which is not the case on several modules in this size. Two things need settling before you commit. This is a TN panel: the specification states a 6 o'clock viewing direction, grey-scale inversion at 12 o'clock, and vertical viewing angles of 50 degrees one way and 25 the other, so mounting orientation has a right answer - if your product is handheld and the orientation is not under your control, the IPS panel also in this size is the better buy.

The VXT430MPIA-03 is a 4.3-inch TFT module with a 480 x 272 RGB panel, an ILI6485D driver and a 5S2P white LED backlight, and no touch panel. It is the display-only member of a pair: the VXT430MPIA-03C is the same module with five-point capacitive touch bonded on. Comparing the two gives something most suppliers cannot show — a measured figure for what adding touch actually costs. This module is rated 500 cd/m² and the touch version 400, on otherwise identical hardware: same panel, same driver, same backlight, same timing, and CIE colour coordinates matching to four decimal places. That difference is the touch panel, and it works out at about 20 per cent of your brightness. Beyond that it is a well-documented module: 800:1 contrast minimum, a published logic current of 22 mA giving a calculable total of about 0.67 W, and full timing tables for three operating modes.

The VXTA10BXH-01C is a 10.1-inch 1280x800 TFT with an integrated capacitive touch panel, driven over 4-lane MIPI DSI. Against our 10.4-inch 800x600 module it carries 2.1 times the pixels through 35% fewer pins — 39 instead of 60, and 32 functional instead of 43 — because four differential pairs move the whole image. Touch is on the module with an FT5426, so there is no separate flex to route. The backlight has PWM in and PWM out, so dimming is handled on the module rather than in your firmware. It is 16:10 at 150 PPI, anti-glare, with 80° viewing in all four directions and no gray scale inversion — together the signature of an IPS cell. Contrast is 700 minimum. The document has real problems, listed here: an active-area figure that does not reconcile, a touch controller with no I2C pins, and a brightness figure with no minimum.