China 16:9 TFT LCD module Manufacturer, Supplier, Factory

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 7 inch Equivalent of innolux LW700AT9309 is a high-performance 7 inch TFT LCD module engineered by Victronix for demanding industrial applications. Featuring an 800 × 480 (WVGA) resolution with 262K colors, this display delivers crisp visuals with a pixel pitch of 0.1905 × 0.1905 mm across its 152.4 × 91.44 mm active area. Encased in a compact 165.0 × 104.54 × 5.2 mm (W×H×T) design, it integrates seamlessly into embedded systems.

The VXT800BYH-01 is an 8.0-inch 800 x 1280 portrait TFT LCD module driven by an HX8260 over a 4-lane MIPI DSI interface on a 24-pin FPC, and the reason a panel this size ships on 24 pins is the interface. Four differential data lanes plus one differential clock pair carry what a 24-bit parallel RGB bus would need fifty pins to carry, so a 1,024,000-pixel display fits a host with a DSI peripheral and almost no other pins to spare. It is the most portrait panel here - 800 x 1280 in a 16:10 column - with square 0.13455 mm pixels at 188.8 PPI, 16.7M colours stated outright, and a diagonal of 203.09 mm that lands within 0.05 per cent of the nominal 8.0 inch. And TE is brought out on pin 4, which is the tearing effect output: with a 2.0 MB frame buffer too big to double cheaply, being able to stay single-buffered and still write tear-free is the difference between a workable design and an expensive one. Three things need settling before you commit. The logic voltage is stated two ways and they do not agree: pin 7 is annotated IOVCC 1.8V while the electrical table's supply-voltage-for-logic row gives 2.8 V typical, and the thresholds are written as fractions of VDD without saying which rail, so a 1.8 V host is either comfortably inside or well outside depending on which figure holds. The storage temperature runs -30 to +70 against an operating range of -20 to +70, so the high end is not wider at all - storage should be wider at both ends and here it is not. And the backlight's seven-in-series array is derived rather than stated, and it puts 27 mA through each string against a 30 mA absolute maximum.

This Victronix 2 inch 176x220 MCU TFT Module is a high-performance 2 inch TFT LCD module engineered for embedded systems requiring compact size, reliability, and vivid display quality. Featuring a 176×220 RGB resolution with 0.18mm pixel pitch, this transmissive display delivers sharp 65K-color visuals ideal for portable medical devices, handheld instruments, and industrial HMIs. Its integrated backlight ensures consistent visibility in a wide range of lighting conditions. At the same time, the low power consumption prolongs battery life, making it an optimal choice for applications where efficiency and durability are paramount.

The VXT620HWI-01 is a 6.2-inch TFT LCD module with 800 x 480 WVGA pixels on a 24-bit parallel RGB interface, and its most useful property is not a headline number but how the optical table is written. Luminance is given as 400 minimum, 500 typical and 600 maximum. Contrast carries a 480 minimum against 600 typical. Uniformity is 70% minimum. The module runs on an ILI6123H and ILI5480. Ratings are -20 to +70 °C, and reliability runs 240 hours per condition with 100 thermal shock cycles and 100 G mechanical shock.

The VXT016VCSA-01 is a 1.6-inch round TFT module with a QSPI interface — the only module in our range with a four-lane serial pixel bus. Small round displays usually want a serial interface because pins are scarce, but 400x400 is 160,000 pixels and single-lane SPI struggles to move a full frame; QSPI carries four bits per clock, roughly four times the throughput at 62.5 MHz, while still using only four data pins. It is also the smallest and densest panel we make at 1.6 inches and 255 PPI with square pixels. ST77903, 16.7M colours, 3.0 V backlight needing no boost, -20 to +70°C.

The CTP-VX116B5741-GG is an 11.6-inch capacitive touch panel in G+G construction, sized for 1366x768 displays. Transmittance is at least 85% with ≥6H hardness, response is ≤12 ms. Suited to portable terminals, industrial tablets, POS, medical devices and vehicle displays.