China 2.8 inch TFT with 5 point multi-touch Manufacturer, Supplier, Factory

The VXT800BYH-01 is an 8.0-inch 800 x 1280 portrait TFT LCD module driven by an HX8260 over a 4-lane MIPI DSI interface on a 24-pin FPC, and the reason a panel this size ships on 24 pins is the interface. Four differential data lanes plus one differential clock pair carry what a 24-bit parallel RGB bus would need fifty pins to carry, so a 1,024,000-pixel display fits a host with a DSI peripheral and almost no other pins to spare. It is the most portrait panel here - 800 x 1280 in a 16:10 column - with square 0.13455 mm pixels at 188.8 PPI, 16.7M colours stated outright, and a diagonal of 203.09 mm that lands within 0.05 per cent of the nominal 8.0 inch. And TE is brought out on pin 4, which is the tearing effect output: with a 2.0 MB frame buffer too big to double cheaply, being able to stay single-buffered and still write tear-free is the difference between a workable design and an expensive one. Three things need settling before you commit. The logic voltage is stated two ways and they do not agree: pin 7 is annotated IOVCC 1.8V while the electrical table's supply-voltage-for-logic row gives 2.8 V typical, and the thresholds are written as fractions of VDD without saying which rail, so a 1.8 V host is either comfortably inside or well outside depending on which figure holds. The storage temperature runs -30 to +70 against an operating range of -20 to +70, so the high end is not wider at all - storage should be wider at both ends and here it is not. And the backlight's seven-in-series array is derived rather than stated, and it puts 27 mA through each string against a 30 mA absolute maximum.

This Victronix 2.76 inch 480x480 Round TFT Module is a premium circular TFT-LCD module engineered for demanding applications requiring robust performance, exceptional image quality, and reliable operation in diverse environments. Featuring a crisp 480×480 resolution within a 70.13mm diameter active area, this module delivers vibrant 16.7 million colors with wide viewing angles. As a leading manufacturer and supplier of TFT modules in China, we are proud to offer the Victronix 2.76 inch TFT Module. This product not only complies fully with ROHS environmental standards, ensuring exceptional performance in various applications, but we also provide customized services to meet our customers' specific needs.

The VXT500BKI-01F is a 5.0-inch TFT LCD module with 720 x 1280 pixels in portrait - HD resolution on a five-inch panel, and one of the highest pixel densities in our range. The pixels are square: 0.08625 mm on both axes, which is exactly what 62.1 mm over 720 pixels and 110.4 mm over 1280 pixels both give, and the shape is an exact 16:9 turned on its side. Brightness is 680 cd/m2 minimum against 850 typical, contrast 1000:1 minimum, and viewing angle 70 degrees minimum in all four directions with no preferred orientation, so how you mount it is a mechanical decision rather than an optical one. Touch is five-point capacitive in a G+G stack rated at 6H and 85% transparency, on its own 7-pin I2C connector. The display runs four MIPI lanes from a single 2.8 V rail, and both the logic current and the backlight power are published, so the total draw can be worked out at roughly 0.93 W.

The CTP-T700GF-05 is a 7-inch capacitive touch panel in G+G construction with ten-point touch on an eight-pin FPC — the smallest connector in our range, and the only panel whose pin-out runs cleanly from ground and supply through I2C, reset and interrupt without empty positions in between. It uses an FT5446 controller and reaches ten points on a 0.7 mm cover glass, so multi-user operation does not cost you thickness. Suited to industrial HMI, portable terminals, collaborative interfaces and compact enclosures.

The CTP-VX116B5741-GG is an 11.6-inch capacitive touch panel in G+G construction, sized for 1366x768 displays. Transmittance is at least 85% with ≥6H hardness, response is ≤12 ms. Suited to portable terminals, industrial tablets, POS, medical devices and vehicle displays.