China 3V segment LCD module Manufacturer, Supplier, Factory

This Victronix 1.77 inch 128x160 TFT Module is a high-quality 1.77 inch TFT LCD module designed for embedded applications requiring a compact, bright, and reliable display solution. Featuring a 128(RGB) × 160 pixel resolution and supporting 65K colors, this module delivers crisp visuals in a versatile form factor. As a professional manufacturer and supplier of TFT modules in China, Victronix 1.77 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT350QHI-26C is a 3.5-inch 320 x 480 portrait TFT LCD module with a capacitive touch panel, driven by ILI9488, and what sets it apart is that three interface families sit on one 50-pin FPC - 24-bit RGB, MCU parallel in 8, 9, 16, 18 or 24-bit form, and SPI - selected by three IM strap pins. The touch is a mutual-capacitance sensor on its own separate 20-pin FPC carrying seven TX and five RX lines. An active area of 48.96 x 73.44 mm whose 2:3 aspect matches the dot matrix precisely, and a diagonal of 88.265 mm, or 3.4750 inches. Contrast is 700 typical, all four viewing angles are 80 degrees with an ALL viewing direction so the module mounts any way round, uniformity carries a floor of 75 per cent, NTSC is 69 typical, and all eight CIE coordinates are published. The backlight is six LEDs in parallel at 120 mA with a forward voltage from 2.7 to 3.3 V, so a 3.3 V rail leaves no headroom and the current is high for a parallel array.

The Victronix VXT700WHA-02P​ is a 7.0-inch 800 × 480 TFT LCD module with a touch panel, driven by MOS_CHIP_G424A​ over an 18-bit parallel RGB interface on a 40-pin 0.5 mm Hirose FH19-40S-0.5SH connector. The reason to look at it is the interface freedom.​ A MODE pin selects between DE mode and SYNC mode, so it works with hosts that emit DE and hosts that emit only HS and VS. L/R and U/D give hardware scan inversion.​ And full numeric timing is published​ — 860 clocks by 528 lines at 27.2 MHz, which is exactly 60 Hz.

This Victronix 2 inch 176x220 MCU TFT Module is a high-performance 2 inch TFT LCD module engineered for embedded systems requiring compact size, reliability, and vivid display quality. Featuring a 176×220 RGB resolution with 0.18mm pixel pitch, this transmissive display delivers sharp 65K-color visuals ideal for portable medical devices, handheld instruments, and industrial HMIs. Its integrated backlight ensures consistent visibility in a wide range of lighting conditions. At the same time, the low power consumption prolongs battery life, making it an optimal choice for applications where efficiency and durability are paramount.

Victronix VXT430TWH-06P is a 4.3-inch TFT LCD module in portrait, and it carries a four-wire resistive touch panel. That combination is easy to overlook and hard to replace. A resistive panel responds to pressure rather than to a finger's conductivity, so it works with gloves, wet or oily hands, a stylus, or the tip of a tool, and it costs less than a capacitive stack — at the price of multi-touch, of 80% transmittance against the 85% a capacitive panel gives, and of a surface that takes a deliberate press. The shape suits a vertical column: the active area is taller than it is wide, so readings stack one per row, scrolling lists and status panels fit naturally, and a portrait enclosure needs no rework. The display itself runs 24-bit RGB on a 40-pin FPC from a single 3.3 V rail, and 130,560 pixels need only 255 KB of frame buffer — small enough that a microcontroller with 512 KB of internal SRAM needs no external RAM at all. Most optical figures carry a stated floor: 310 cd/m² minimum brightness, 400 minimum contrast, 80° minimum viewing angle. Two things want settling before you commit, and we set them out rather than leave them for bring-up: the specification writes the resolution as 480 × 272 while the geometry says the panel is 272 wide by 480 tall, and the driver IC is named two different ways in two different places.

The VXT240FBQS-01 is a transflective, sunlight readable 2.4-inch TFT module — and the only one in our range that pairs transflective construction with an anti-glare polarizer. Transflective gives it a reflective path so it reads by ambient light outdoors with the backlight off; anti-glare stops the surface mirroring the sky. It also posts 1500:1 contrast, higher than any transmissive panel we make. The display is 240x320 portrait with square pixels, driven by an ST7789T3 over an 8- or 16-bit MCU bus selected by one pin. Rated -20 to +70°C.