China VA segment LCD module Manufacturer, Supplier, Factory

This Victronix VA Negative LCD Module is a high-performance Vertical Alignment (VA) LCD module featuring negative transmissive technology. Designed for industrial instruments, automotive, smart home, white goods, and medical equipment applications, this module optimizes for vertical viewing with a fixed 6 o'clock viewing angle. As a professional manufacturer and supplier of TFT modules in China, Victronix VA Segment LCD Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The Victronix VXT700WHA-02P​ is a 7.0-inch 800 × 480 TFT LCD module with a touch panel, driven by MOS_CHIP_G424A​ over an 18-bit parallel RGB interface on a 40-pin 0.5 mm Hirose FH19-40S-0.5SH connector. The reason to look at it is the interface freedom.​ A MODE pin selects between DE mode and SYNC mode, so it works with hosts that emit DE and hosts that emit only HS and VS. L/R and U/D give hardware scan inversion.​ And full numeric timing is published​ — 860 clocks by 528 lines at 27.2 MHz, which is exactly 60 Hz.

2.9 Inch Bar TFT Module VXT297BZS-01, its IPS technology provides consistent color and clarity across wide 80-degree viewing angle in all directions, 250 cd/m² typical brightness, and a high typical contrast ratio of 1000:1. Secondly, it supports versatile connectivity via 3-wire SPI + 18-bit RGB parallel interface (with DE/VSYNC/HSYNC control), driven by the integrated ST7701S controller. Besides, it integrates a 4-diode white LED array with 12V/20mA drive, offering 50,000-hour lifespan (50% brightness retention), which ensures long-term usage in various industrial applications. Our bar type TFT solution can be perfectly used in many applications like industrial, automotive, medical, home appliance and maritime, etc.

The VXT104QXHA-02-B is a 10.4-inch TFT LCD module with 1024 x 768 XGA resolution and an HDMI input — the first HDMI module in our range, and the difference is the point. Every other module we sell is a component you have to drive: your processor needs the right peripheral, your firmware needs an initialisation sequence, your board needs a frame buffer, and your power design needs the sequencing right. This one includes the driver PCBA, so it takes HDMI from a single-board computer, an industrial PC, a media player or a laptop and shows a picture. There is no display interface to design and no 1.5 MB of frame memory to find in your host. It is also the easy answer when an old XGA panel fails: you do not have to reproduce the original interface, just feed it HDMI from the new computer. Power comes from a 12 V DC jack or 5 V over the HDMI connector, with the jack recommended because no input current is published. Brightness is 600 cd/m² with contrast at 600 minimum and 800 typical, viewing angle 80° in all four directions, and pixels square to within 0.002% so circles need no correction. We are equally plain about what the document does not settle: no LED forward voltage or backlight power, no input current, brightness and viewing angle carry typical values with no minimums, the supported HDMI video modes are not listed, and the outline drawing is missing from the file.

The CTP-VX185A2132 is an 18.5-inch capacitive touch panel in G+G construction, and the only panel in our range with a USB interface — so it works the moment you plug it in, with the multi-touch HID driver already in Windows, Linux, macOS and Android. There is no I2C address to configure and no level shifting to worry about. Ten-point touch, a 409.8 x 230.4 mm active area matched to 1366x768, powered from 5 V. Built for kiosks, information displays, POS and interactive screens.