China 4.3 inch display for outdoor equipment Manufacturer, Supplier, Factory

This Victronix 15.0 inch 1024*768 IPS TFT Module is a high-performance electrical module designed to deliver reliable power management in demanding applications. It provides customers with a premium display, featuring an 800×800 resolution within a 304.128×228.096 mm active area, an 89° viewing angle (all directions), and a typical brightness of 450 cd/m². As a professional TFT module manufacturer and supplier in China, this Victronix 15 inch TFT Module strictly complies with the ROHS environmental standards to provide superior application performance. Additionally, we provide customized services tailored to meet the specific needs of our clients. This Victronix 15 inch TFT Module is designed for factory automation control systems, visualization tools, tool machine control systems, medical devices, advertising machines, robots, smart homes, notebooks, digital camera applications, industrial equipment devices, and other electronic products.

The VXT400MCCA-01 is a round TFT module: 720 x 720 pixels in a square array with a circular active area of 101.52 mm diameter. It is the largest round module we offer — the others are 1.6 and 2.1 inches — and at 720 x 720 the highest resolution, at 180 PPI. The round shape suits products whose face is already circular: instrument gauges, thermostats, rotary controls, speaker and hub covers, and automotive clusters. Designers should know that the circle covers only 78.5% of the pixel array, so the four corners are invisible and content must stay within about 45 mm of centre. It runs MIPI DSI with four data lanes, and the capacitive touch interface sits on the same 30-pin connector — interrupt, I2C, reset and two dedicated supply pins — so one flex and one socket cover display and touch. Separate 1.8 V and 3.3 V rails mean 1.8 V host logic connects directly with no level shifting. The module is 2.09 mm thick, the thinnest in this size class.

The VXT430MPIA-03C is a 4.3-inch TFT module with a five-point capacitive touch panel bonded on: a 480 x 272 RGB display and an I2C touch controller in one assembly. What sets it apart is practical rather than headline — this is the 4.3-inch module whose power you can actually budget, because it publishes a logic current of 22 mA where the sibling module rated identically leaves it as TBD. Total draw is about 0.67 W, the lowest of any 4.3-inch module we offer with touch. It is also unusually complete on the touch side: accuracy of ±1.5 mm at the centre and ±2.5 mm at the edge, surface hardness of at least 7H, and transparency of at least 85% are all given as numbers. Contrast is 800:1 minimum with 80° viewing in all four directions. Two things need attention before ordering, and both are stated here: the module matches a sibling part on every comparable figure apart from the driver IC, and its reliability programme is shorter than the rest of the range.

The CTP-T700IXN-06C is a 7-inch capacitive touch panel in G+G construction, and the most completely specified one we publish — outline, view area, drive IC, interface, I2C address, touch-point count and connector are all stated, so you can design with it straight away. It uses an FT5426 controller over I2C, supports five touch points, and is rated ≥7H. The gasket carries double-side tape, so it fits to a display without bonding equipment. Built for industrial HMI, control panels, portable terminals and retrofit work.

The VX50472 is a VA segment LCD module with six digits, dedicated status icons and a white LED backlight. A 64 × 32 mm outline, 3V LCD drive and COG + FPC construction support integration into compact instruments and control panels.

The VXT350HQS-01X-W is a 3.5-inch TFT LCD module with 320x240 QVGA resolution and an anti-glare top polarizer — the only module in our range that specifies one. Combined with all-direction viewing and no grayscale inversion, it stays readable wherever the operator stands and wherever the light comes from, without spending brightness or backlight life on the problem. Rated -30 to +85°C, with 24-bit RGB for video and a separate SPI channel for configuration.