China 4.3 inch HMI display module Manufacturer, Supplier, Factory

Victronix 5.7 inch 640×480 TFT Module offers a high typical brightness of 1000 cd/m² and a typical contrast ratio of 450:1, ensuring excellent readability from various viewing positions. Secondly, it supports 18-bit RGB parallel digital and SYNC (HSYNC/VSYNC) & DE modes. Besides, it features a 21-die White LED backlight with a lifetime of 30,000 to 50,000 hours (retaining 50% brightness), ensuring clarity and usability in various lighting conditions. It also undergoes rigorous tests, including high/low temperature storage and operation, temperature cycling, humidity, vibration, and shock. Consequently, it can operate effectively across an extensive temperature range of -20°C to +70°C. This Victronix 5.7 inch TFT display is widely used in Factory automation HMI, medical monitors, test & measurement equipment, transportation systems, and embedded control panels requiring sunlight-readable, high-reliability displays.

This Victronix 7 inch 800x480 Capacitive Touch TFT Module is a high-performance 7 inch TFT LCD module designed for industrial embedded systems. It features an 800×480 resolution screen, a capacitive touch panel (CTP), and a high-luminance backlight system within a compact form factor. As a professional manufacturer and supplier of TFT modules in China, this Victronix 7 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT430CNH-07C is the capacitive-touch version of our 4.3-inch 480 x 272 panel, and the way it is put together is the reason to look at it. Touch is not squeezed onto the display FPC - it has its own 10-pin connector carrying I2C, reset and interrupt, so the 40-pin display bus stays clean and the two can be routed independently. The mechanical drawing documents the touch panel to a tenth of a millimetre, and the numbers show the touch view area sitting 0.40 mm outside the LCD active area on every side, so there is no dead band at the edges of the screen. Two things decide whether it suits your product. It is a TN panel: the specification states a 12 o'clock viewing direction, grey-scale inversion at 6 o'clock, and vertical viewing angles of 45 degrees one way and 60 the other, so mounting orientation has a right answer - and if your product is handheld or portable and the orientation is not under your control, a panel with no preferred direction is the better buy.

Victronix is a professional TFT module manufacturer and supplier in China. We have been in this field for 18 years and have developed several models. In addition to our standard products, we also offer a customized service to meet our customers' needs. This Victronix 4.3 inch automotive outdoor TFT module is a sturdy 4.3 inch TFT-LCD module designed for challenging automotive and outdoor applications. Combining high-brightness display technology with extended temperature resilience, this module delivers exceptional visual performance in harsh environments. Featuring a 480×RGB×272 resolution with 16.7 million colors within a compact 95.04×53.86 mm active area, it provides crisp visuals with wide viewing angles up to 80° (CR>10) in all directions.

The CTP-T700IXN-06C is a 7-inch capacitive touch panel in G+G construction, and the most completely specified one we publish — outline, view area, drive IC, interface, I2C address, touch-point count and connector are all stated, so you can design with it straight away. It uses an FT5426 controller over I2C, supports five touch points, and is rated ≥7H. The gasket carries double-side tape, so it fits to a display without bonding equipment. Built for industrial HMI, control panels, portable terminals and retrofit work.

The CTP-VX215A5698-GG is a 21.5-inch capacitive touch panel in G+G construction, sized for 1920x1080 displays and for the enclosures, VESA mounts and kiosk cabinets already built around that format. It adds touch to an existing panel instead of replacing the whole assembly. Transmittance is at least 85% with ≥6H surface hardness, response is ≤12 ms, and it runs from 2.8 to 3.3 V. Suited to kiosks, POS, industrial HMI and education displays, and to retrofitting touch onto existing 21.5-inch hardware.