China 4.3 inch TFT LCD module Manufacturer, Supplier, Factory

This Victronix 7 inch 1024x600 IPS TFT Module is a high-quality 7 inch TFT-LCD module engineered for demanding industrial applications. Featuring an IPS panel with a sharp 1024 × 600 resolution, it delivers vibrant 16.7 million colors and wide 178° viewing angles (all directions) for consistent visual clarity. With a typical brightness of 250 cd/m² and 800:1 contrast ratio, this display ensures readability in diverse lighting conditions. As a professional manufacturer and supplier of TFT modules in China, Victronix 7 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 11.6 inch 1920x1080 IPS TFT Module is a high-performance 11.6 inch TFT LCD module engineered for demanding industrial applications. Featuring a 1920×1080 Full HD resolution and IPS technology, this display delivers consistent color accuracy and wide viewing angles of 89° (H/V) in all directions. The anti-glare coating ensures readability even under bright ambient light, while the normally black/transmissive panel design enhances contrast for sharp imagery. As a professional manufacturer and supplier of TFT modules in China, Victronix 11.6 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

Victronix is a professional TFT module manufacturer and supplier in China. We have been in this field for 18 years and developed several models. This Victronix 3.4 inch 800x800 Round IPS TFT Module features 800×(RGB)×800 pixel resolution within an 87.6×87.6 mm active area, supporting up to 16.7 million colors for rich, detailed imagery. Combining exceptional optical performance with robust reliability, this display solution delivers crisp visuals across extreme operating conditions.

The VXT350MHSA-08 is a 3.5-inch portrait TFT module: 320 x 480 pixels over an active area of 48.96 x 73.44 mm, in a true 2:3 shape. What distinguishes it is how many ways it can be driven — RGB parallel, 3-wire SPI, 4-wire SPI and 8080-style MCU parallel all sit on one 50-pin connector, selected by three pins, IM0, IM1 and IM2, read at power-up. That means the interface stops being a decision you must make before choosing a display: you can prototype on SPI and move to RGB when you need the refresh rate, without changing the module, the connector or the enclosure. Driven by an ST7796U, it also runs its 3.0 V backlight with no boost converter — no inductor, no switching noise — unlike the other 3.5-inch modules in the range which need 18 to 19 V. Contrast is given as an 800:1 minimum, viewing angle is 80° in all four directions with viewing direction ALL, and total consumption is about 0.41 W from a measured 19.51 mA of logic current.

The VXTA10BXH-01 is the display-only version of our 10.1-inch 1280x800 MIPI panel. It shares the active area, resolution, 39-pin connector and 4-lane MIPI interface with the VXTA10BXH-01C but omits the capacitive touch layer — and what that buys is the point: 2.9 mm thick against 5.15 mm, and an outline of 229.6 x 149.3 mm against 238.60 x 160.6 mm. If touch is handled elsewhere or not needed, you are not paying for a layer you will not use. It is also the version with complete documentation: a luminance minimum of 200 cd/m², a ten-item reliability programme citing IEC and GB standards, an MTBF of 50,000 hours, and inspection to MIL-STD-105E at AQL 0.65. It runs -20°C to +70°C, ten degrees wider than the touch version, and states the active area as 216.96 x 135.6 mm, confirming the correction we derived on the sibling.

The VXT700TOSA-01 brings a circular display format to digital dials, status indicators and distinctive product interfaces. Its 1080×1080 resolution and 4-lane MIPI connection support detailed graphics designed around a central focal point.