China 4.3 inch TFT 400 cd/m² Manufacturer, Supplier, Factory

This Victronix 3.5'' 480x640 transflective IPS TFT Module is a high-performance 3.5 inch TFT LCD module featuring advanced Transflective IPS technology. This module delivers exceptional readability both indoors and under direct sunlight, making it ideal for industrial controls, portable instrumentation, and outdoor equipment.

The VXT350FPQI-01 is a transflective, sunlight readable 3.5-inch TFT module for equipment that moves between indoor and outdoor light. Outdoors it reads by reflected light, and the backlight can be switched off entirely rather than merely dimmed, removing the largest load in the module. It is the third transflective panel in our range and the only one you can drive over a 3-wire SPI from an ordinary microcontroller — 240x320 portrait, square pixels, ILI9341V, 0.384 W backlight. Rated -20 to +70°C with ±8 kV air ESD.

The CTP-T350GF-04 is a 3.5-inch capacitive touch panel in G+G construction, and the only portrait panel in our range — a 48.96 x 73.44 mm view area in a true 2:3 shape, matched to 320x480 displays and to our 3.5-inch portrait TFT module. It is also the only panel whose I/O runs down to 1.8 V, so a 1.8 V-logic host can drive it without a level shifter. An FT5446 controller handles five-point touch over I2C. Built for handheld instruments, wall controllers, elevator panels and portable medical devices.

The Victronix VXT700QAEW-01C is a 7.0-inch TFT LCD module that ships as a finished touch assembly rather than a bare panel. A projected-capacitive sensor, G+G construction, 6H surface hardness, at least 85% light transmittance — so there is no second touch part to source, no alignment step and no bonding process in your build. Luminance is 1000 cd/m² typical with an 80/80/80/80 viewing angle, video arrives over 40-pin LVDS driven by EK79001HN and EK73215BCGA, with an ILI2130 touch controller. Rated -30°C to +85°C, RoHS compliant.

Where a display can be mounted is usually decided by mechanics, then corrected in software. The Victronix VXT700KWSA-01 removes that second step. Two dedicated pins — L/R on pin 33 and U/D on pin 34 — flip the image horizontally and vertically in hardware, so the same module works upright, upside down, behind a mirror, or viewed through a periscope without touching a line of framebuffer code or paying the performance cost of software rotation. The 7.0-inch 800x480 panel runs on an ST7277 driver over single-channel LVDS on a 40-pin connector, brightness is controlled by a dedicated LED_PWM pin, and STBYB puts the panel into standby for power-sensitive products.

The VXT177HSS-13 combines 500 cd/m² typical brightness with a 4-wire SPI interface in a compact 1.77-inch TFT LCD. An ST7735V driver and 12-pin connection make the module an option for embedded designs that prioritize display brightness and serial connectivity.