China 4.3 inch TFT LCD with separate touch power Manufacturer, Supplier, Factory

The VXT350QHI-26C is a 3.5-inch 320 x 480 portrait TFT LCD module with a capacitive touch panel, driven by ILI9488, and what sets it apart is that three interface families sit on one 50-pin FPC - 24-bit RGB, MCU parallel in 8, 9, 16, 18 or 24-bit form, and SPI - selected by three IM strap pins. The touch is a mutual-capacitance sensor on its own separate 20-pin FPC carrying seven TX and five RX lines. An active area of 48.96 x 73.44 mm whose 2:3 aspect matches the dot matrix precisely, and a diagonal of 88.265 mm, or 3.4750 inches. Contrast is 700 typical, all four viewing angles are 80 degrees with an ALL viewing direction so the module mounts any way round, uniformity carries a floor of 75 per cent, NTSC is 69 typical, and all eight CIE coordinates are published. The backlight is six LEDs in parallel at 120 mA with a forward voltage from 2.7 to 3.3 V, so a 3.3 V rail leaves no headroom and the current is high for a parallel array.

This Victronix 5.65 inch 640x480 IPS TFT Module is a high-performance 5.65 inch TFT-LCD module engineered for reliability in industrial environments. Featuring an IPS panel with 640×480 (VGA) resolution and 16.7 million colors, it delivers exceptional visual clarity with wide viewing angles of 80° (3/6/9/12 o’clock directions). As a professional manufacturer and supplier of TFT modules in China, Victronix 5.65 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT101YIA-19C is a 10.1-inch TFT LCD module with 800 x 1280 pixels, and the shape is what sets it apart: this is the only portrait panel in our 10.1-inch range, where the others are 1280 x 800 landscape. Its active area of 135.36 x 216.58 mm is taller than it is wide by an exact 1.6 to 1, so content stacks vertically the way a phone screen does — readings, lists and status panels one row at a time — and it drops into enclosures cut for portrait without rotating the design. Touch is a ten-point projected capacitive panel on an ILI2511 controller, specified at 6H surface hardness, 85% transparency and accuracy of ±1.5 mm at centre rising to ±2.5 mm at the edges, which is the pair of numbers you actually need when deciding how far from the bezel a button may sit. The display runs on an ILI9881C over four MIPI lanes, the pixels are square to within 0.002% so circles need no correction, and contrast carries a stated 800 minimum. One feature is worth calling out: pin 27 outputs a CABC PWM signal, meaning the module can dim its own backlight from picture content rather than asking your processor to do it. We are equally direct about the limits. The operating range is -10 to +50 °C, narrower than most panels in our range and the first thing to check if your product sits in a hot enclosure or a vehicle. Brightness is 250 cd/m² typical with no stated minimum. Reliability runs six tests at 96 hours with no ESD, vibration, shock or MTBF, and the outline drawing is not dimensioned in this file.

The CTP-VX185A2132 is an 18.5-inch capacitive touch panel in G+G construction, and the only panel in our range with a USB interface — so it works the moment you plug it in, with the multi-touch HID driver already in Windows, Linux, macOS and Android. There is no I2C address to configure and no level shifting to worry about. Ten-point touch, a 409.8 x 230.4 mm active area matched to 1366x768, powered from 5 V. Built for kiosks, information displays, POS and interactive screens.

The VXT101BAH-02 is a 10.1 inch color TFT LCD module for equipment that uses separate buttons, keypads or host controls. Its landscape display and LVDS interface provide a platform for presenting menus, measurements and operating information.

The VXT101BAHA-02C combines a 10.1 inch color TFT LCD with 5-point capacitive touch. Wide viewing angles, LVDS display input and USB or I²C touch interfaces support integration into embedded terminals and equipment control panels.