China 7 inch LCD panel Manufacturer, Supplier, Factory

This Victronix 10.1 inch HD Capacitive Touch IPS TFT Module is a high-performance 10.1 inch TFT-LCD module integrating an IPS panel, capacitive touch (CTP), and LVDS interface for superior visual clarity and responsive interaction. Designed for industrial and embedded applications, this module delivers vibrant visuals, wide viewing angles, and robust reliability. As a professional manufacturer and supplier of TFT modules in China, Victronix 10.1 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 8 Inch AT080TN64 LCD Display is a high-performance 8 inch TFT LCD module engineered for embedded systems requiring compact size, reliability, and vivid display quality. Featuring 800(RGB)×480 resolution within a compact 192.8×116.9×6.4mm footprint, this anti-glare display combines clarity with durability.

The VXT700B1YI-03 is a 7-inch TFT module built in portrait: a 103.60 x 162.27 mm outline, 94.2 x 150.72 mm active area, and 800 x 1280 resolution at 216 PPI. Two figures set it apart. The first is orientation — most 7-inch modules are landscape, and this one is tall, which suits forms, lists and scrolling content. The second is brightness: 800 cd/m² minimum and 1000 typical. That minimum is the highest guaranteed brightness in our range, four times the 200 cd/m² minimum of our 10.1-inch module, and it is a floor you can hold a supplier to rather than an average. It runs MIPI DSI on the widely used ILI9881 driver, has an anti-glare top polarizer, 80° minimum viewing in all four directions, and a 20-LED backlight at 1.28 W with 30,000 hours minimum life. One contradiction in the document needs resolving before layout, and we state it rather than pick the reading that looks better.

The VXTA10BXH-01 is the display-only version of our 10.1-inch 1280x800 MIPI panel. It shares the active area, resolution, 39-pin connector and 4-lane MIPI interface with the VXTA10BXH-01C but omits the capacitive touch layer — and what that buys is the point: 2.9 mm thick against 5.15 mm, and an outline of 229.6 x 149.3 mm against 238.60 x 160.6 mm. If touch is handled elsewhere or not needed, you are not paying for a layer you will not use. It is also the version with complete documentation: a luminance minimum of 200 cd/m², a ten-item reliability programme citing IEC and GB standards, an MTBF of 50,000 hours, and inspection to MIL-STD-105E at AQL 0.65. It runs -20°C to +70°C, ten degrees wider than the touch version, and states the active area as 216.96 x 135.6 mm, confirming the correction we derived on the sibling.

The CTP-T700GA-51 is a 7-inch capacitive touch panel in G+G construction, and the only panel in our range with true ten-point multi-touch — the other three 7-inch panels all stop at five. That matters for two-person operation, multi-finger gestures and collaborative interfaces. An Atmel maXTouch 641T controller drives a 16 by 28 channel grid, behind a 1.1 mm cover glass rated at 6H with impact energy of at least 0.35 J. Suited to collaborative terminals, education displays, industrial HMI and kiosks.

The CTP-T700IXN-06C is a 7-inch capacitive touch panel in G+G construction, and the most completely specified one we publish — outline, view area, drive IC, interface, I2C address, touch-point count and connector are all stated, so you can design with it straight away. It uses an FT5426 controller over I2C, supports five touch points, and is rated ≥7H. The gasket carries double-side tape, so it fits to a display without bonding equipment. Built for industrial HMI, control panels, portable terminals and retrofit work.