China Handheld instrument display Manufacturer, Supplier, Factory

This Victronix 1.77 inch 128*160 Outdoor TFT Module is a high-performance TFT LCD module designed for demanding outdoor and industrial applications. Featuring a 1.77 inch diagonal screen with a sharp 128 (RGB) × 160 resolution, this module delivers vibrant 65K-color visuals and exceptional readability in diverse lighting conditions. As a professional manufacturer and supplier of TFT modules in China, Victronix 1.77 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 2 inch 240x320 SPI TFT Module is a compact 2.0 inch TFT LCD module engineered for embedded systems requiring reliable visual performance. Featuring a 240×320 RGB resolution on a 30.6 × 40.80 mm active area, this module delivers sharp, vibrant images with a pixel pitch of 0.1275 × 0.1275 mm. As a professional manufacturer and supplier of TFT modules in China, Victronix 2 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 2.8 inch 2.8 inch 240x320 Resistive Touch TFT Module is a high-reliability 2.8 inch TFT display module engineered for demanding industrial, medical, and embedded applications. Combining a crisp 240×320 RGB resolution with integrated 4-wire resistive touch, this module delivers robust performance in compact dimensions (50.00 × 69.20 × 3.55 mm). As a professional manufacturer and supplier of TFT modules in China, Victronix 2.8 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT350MHSA-08 is a 3.5-inch portrait TFT module: 320 x 480 pixels over an active area of 48.96 x 73.44 mm, in a true 2:3 shape. What distinguishes it is how many ways it can be driven — RGB parallel, 3-wire SPI, 4-wire SPI and 8080-style MCU parallel all sit on one 50-pin connector, selected by three pins, IM0, IM1 and IM2, read at power-up. That means the interface stops being a decision you must make before choosing a display: you can prototype on SPI and move to RGB when you need the refresh rate, without changing the module, the connector or the enclosure. Driven by an ST7796U, it also runs its 3.0 V backlight with no boost converter — no inductor, no switching noise — unlike the other 3.5-inch modules in the range which need 18 to 19 V. Contrast is given as an 800:1 minimum, viewing angle is 80° in all four directions with viewing direction ALL, and total consumption is about 0.41 W from a measured 19.51 mA of logic current.

The VXT430GWH-02 is a 4.3-inch IPS TFT module in portrait orientation: 480 x 800 pixels over an active area of 56.16 x 93.60 mm, taller than wide, with a diagonal of 4.2975 inches. It is the only portrait module and the only IPS module in our 4.3-inch range. Being IPS means viewing angle is 80° typical in all four directions with no preferred direction and no gray scale inversion to design around — decide orientation on mechanical grounds alone. Pixel pitch is 0.117 mm square, giving 217 PPI, so small text stays legible and circular graphics need no correction. It runs 24-bit RGB over a 42-pin connector driven by an HX8369A, with a serial port on the same connector for configuration. Brightness is 310 minimum, 350 typical and 390 maximum cd/m² — the lowest in the family and intended for indoor and handheld use, published as a complete range you can design and inspect against. At 2.15 mm it is also the thinnest 4.3-inch module we offer.

The VXT700BAHA-01CA brings color graphics and capacitive touch to compact equipment panels. Its LVDS display connection and I2C touch interface support host-controlled menus, settings and status screens in a single front-panel assembly.