China IPS bar display Manufacturer, Supplier, Factory

This Victronix 6.2 inch 800×480 TFT Module offers a typical brightness of 700 cd/m² and a contrast ratio of 600:1, ensuring excellent readability from various angles. Secondly, it integrates a backlight unit utilizing 18 white LEDs with a typical lifetime of 30,000 to 50,000 hours (to 50% initial brightness), ensuring clear visibility in all lighting conditions. Besides, it supports a 24-bit parallel RGB with DE/SYNC mode control interface and an ILI6123H + ILI5480 controller. In addition, it passes rigorous environmental testing, including thermal shock (-30°C ↔ +80°C cycles), humidity storage (60°C/90% RH), and mechanical vibration, ensuring it can operate seamlessly across an extended temperature range from -20°C to +70°C. This 6.2 inch TFT display by Victronix is commonly used in medical devices, vehicle displays, industrial control systems, and portable instrumentation where readability under varied lighting conditions is critical.

The Victronix VXT700WHA-02P​ is a 7.0-inch 800 × 480 TFT LCD module with a touch panel, driven by MOS_CHIP_G424A​ over an 18-bit parallel RGB interface on a 40-pin 0.5 mm Hirose FH19-40S-0.5SH connector. The reason to look at it is the interface freedom.​ A MODE pin selects between DE mode and SYNC mode, so it works with hosts that emit DE and hosts that emit only HS and VS. L/R and U/D give hardware scan inversion.​ And full numeric timing is published​ — 860 clocks by 528 lines at 27.2 MHz, which is exactly 60 Hz.

This Victronix 3.5 inch Tianma Panel CTP TFT Module is a high-reliability 3.5 inch TFT LCD module integrating a capacitive touch panel (CTP), engineered by Victronix for industrial and embedded systems. Featuring a 320×240 RGB resolution, NV3035GTC driver IC, and dual RGB+SPI interfaces, this module delivers robust performance in critical environments. As a professional manufacturer and supplier of TFT modules in China, Victronix 3.5 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 2 inch 240x320 SPI TFT Module is a compact 2.0 inch TFT LCD module engineered for embedded systems requiring reliable visual performance. Featuring a 240×320 RGB resolution on a 30.6 × 40.80 mm active area, this module delivers sharp, vibrant images with a pixel pitch of 0.1275 × 0.1275 mm. As a professional manufacturer and supplier of TFT modules in China, Victronix 2 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 2.8 inch 2.8 inch 240x320 Resistive Touch TFT Module is a high-reliability 2.8 inch TFT display module engineered for demanding industrial, medical, and embedded applications. Combining a crisp 240×320 RGB resolution with integrated 4-wire resistive touch, this module delivers robust performance in compact dimensions (50.00 × 69.20 × 3.55 mm). As a professional manufacturer and supplier of TFT modules in China, Victronix 2.8 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT700MYIA-03C is a 7-inch front panel assembly: a display and touch stack under a custom cover glass carrying three functional openings — a camera window, a proximity sensor window and a microphone through-hole. The ink over the openings is specified with a number you can measure: visible light transmittance at 520 nm below 25%, which is what lets the proximity sensor hide behind the glass while still passing IR. Everything runs on one 40-pin flex at 0.30 mm pitch, and that flex carries the LED backlight as well, so there is one connector rather than two. The glass has an anti-fingerprint coating, there is black electromagnetic shielding on both sides, and the section gives a 2.25 mm finished stack with component height capped at 1.8 mm. This is a mechanical drawing, so the page is explicit about what is not in it: no resolution, interface, pin assignment, optical or environmental data.