China 2.86 inch TFT LCD Manufacturer, Supplier, Factory

Victronix 3.5 inch 320x240 Sunlight Readable TFT Module different from other manufacturers? At first, its 1000 cd/m² brightness, 300:1 contrast ratio, and viewing angles of Horizontal: ±60°, Vertical: +50°/-60° ensure vivid imagery. Secondly, the device supports a 24-bit parallel RGB interface + SPI control (HX8238D driver IC). Additionally, it features a 6-die white LED backlight with a lifespan of 30,000 to 50,000 hours, ensuring reliable performance in various industrial applications. Besides, it meets RoHS standards and passes rigorous reliability tests (thermal shock, humidity, storage) to operate flawlessly in extreme temperatures (-20°C to +85°C) and withstand harsh storage conditions (-30°C to +85°C). This Victronix 3.5 inch TFT Module is suitable for Industrial HMIs, medical devices, test and measurement equipment, portable instruments, and other embedded systems requiring a bright, reliable, and compact color display solution.

This Victronix 7 inch 1024x600 MIPI IPS Touch TFT Module is a high-performance 7 inch TFT-LCD module with integrated capacitive touch panel (CTP). Engineered for reliability in demanding environments, this module combines a BOE-sourced IPS panel with 1024 × 600 resolution and 16.7 million colors for vivid visuals and wide viewing angles (80° at Cr≥10 at all directions). As a professional manufacturer and supplier of TFT modules in China, Victronix 7 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT800BYH-01 is an 8.0-inch 800 x 1280 portrait TFT LCD module driven by an HX8260 over a 4-lane MIPI DSI interface on a 24-pin FPC, and the reason a panel this size ships on 24 pins is the interface. Four differential data lanes plus one differential clock pair carry what a 24-bit parallel RGB bus would need fifty pins to carry, so a 1,024,000-pixel display fits a host with a DSI peripheral and almost no other pins to spare. It is the most portrait panel here - 800 x 1280 in a 16:10 column - with square 0.13455 mm pixels at 188.8 PPI, 16.7M colours stated outright, and a diagonal of 203.09 mm that lands within 0.05 per cent of the nominal 8.0 inch. And TE is brought out on pin 4, which is the tearing effect output: with a 2.0 MB frame buffer too big to double cheaply, being able to stay single-buffered and still write tear-free is the difference between a workable design and an expensive one. Three things need settling before you commit. The logic voltage is stated two ways and they do not agree: pin 7 is annotated IOVCC 1.8V while the electrical table's supply-voltage-for-logic row gives 2.8 V typical, and the thresholds are written as fractions of VDD without saying which rail, so a 1.8 V host is either comfortably inside or well outside depending on which figure holds. The storage temperature runs -30 to +70 against an operating range of -20 to +70, so the high end is not wider at all - storage should be wider at both ends and here it is not. And the backlight's seven-in-series array is derived rather than stated, and it puts 27 mA through each string against a 30 mA absolute maximum.

The VXTA10BXH-01 is the display-only version of our 10.1-inch 1280x800 MIPI panel. It shares the active area, resolution, 39-pin connector and 4-lane MIPI interface with the VXTA10BXH-01C but omits the capacitive touch layer — and what that buys is the point: 2.9 mm thick against 5.15 mm, and an outline of 229.6 x 149.3 mm against 238.60 x 160.6 mm. If touch is handled elsewhere or not needed, you are not paying for a layer you will not use. It is also the version with complete documentation: a luminance minimum of 200 cd/m², a ten-item reliability programme citing IEC and GB standards, an MTBF of 50,000 hours, and inspection to MIL-STD-105E at AQL 0.65. It runs -20°C to +70°C, ten degrees wider than the touch version, and states the active area as 216.96 x 135.6 mm, confirming the correction we derived on the sibling.

The CTP-VX156B5544-GG is a 15.6-inch capacitive touch panel in G+G construction, built for laptop-class and portable equipment rather than fixed kiosks. Note for buyers: at 15.6 inches it is inspected in the 10.1–17 inch cosmetic tier, which is about 25% stricter than the tier used for 21.5-inch and larger panels. Transmittance is at least 85% with ≥6H hardness, response is ≤12 ms, and it draws just 12–14.5 mA — low enough for battery-powered devices. Suited to portable terminals, medical carts, industrial laptops and handheld HMI.

The VXT397FBWS-01 is a 3.97-inch transflective TFT LCD that combines ambient-light reflection with LED backlighting. An anti-glare surface and compact portrait format support integration into handheld instruments and space-conscious equipment.