China outdoor readable TFT module 4.3 inch Manufacturer, Supplier, Factory

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 5 inch 800x480 TFT Module is a high-quality 5 inch TFT LCD module engineered by Victronix Tecenstar for industrial, medical, and embedded systems. Featuring an 800×480 resolution, 16.7M color depth, and RGB 24-bit interface, it delivers sharp visuals with wide viewing angles. Designed to withstand harsh environments, this module combines optical excellence with military-grade durability.

The Victronix VXT700WHA-02P​ is a 7.0-inch 800 × 480 TFT LCD module with a touch panel, driven by MOS_CHIP_G424A​ over an 18-bit parallel RGB interface on a 40-pin 0.5 mm Hirose FH19-40S-0.5SH connector. The reason to look at it is the interface freedom.​ A MODE pin selects between DE mode and SYNC mode, so it works with hosts that emit DE and hosts that emit only HS and VS. L/R and U/D give hardware scan inversion.​ And full numeric timing is published​ — 860 clocks by 528 lines at 27.2 MHz, which is exactly 60 Hz.

The VXT350CQH-05 is a 3.5-inch 320 x 240 QVGA TFT LCD module, and two things about it are worth knowing before anything else. It is 3.2 mm thick, the thinnest module in this range on the same 76.90 x 63.90 mm footprint, and it carries no touch panel - so if your product has a separate touch solution, or none, you are not paying for one. The backlight is confirmed twice over: the mechanical drawing shows the LED circuit as six dies in one string from LEDA to LEDK, and 19.2 V over six gives exactly 3.20 V per LED, while the stated 0.384 W matches 19.2 V x 20 mA exactly. Response time is also better documented than usual, with both Ton and Toff published and floors on each - 15 and 30 ms on, 35 and 50 ms off - and contrast carries a 200 minimum. Two things need settling before you commit. This is a TN panel: the specification states a 12 o'clock viewing direction with grey-scale inversion at 6 o'clock, and vertical angles of 50 and 60 degrees, so mounting orientation has a right answer - if your product is handheld and the orientation is not under your control, ask us about a panel with no preferred direction. And the timing chapter runs three pages and is published entirely as diagrams, with a note saying the sequences are for reference only and referring you to the HX8238D data sheet, so there is nothing in this document to configure a controller from.

The CTP-VX104B5747-GG is a 10.4-inch capacitive touch panel in G+G construction, sized for the 1024x768 industrial panels that a great deal of equipment was built around — so it is usually bought as a replacement rather than a new design. At 10.4 inches it sits just past the 10.1-inch boundary in the inspection standard, making it one cosmetic tier more permissive than sub-10-inch panels. Transmittance is ≥85% with ≥6H hardness, response ≤12 ms. Suited to industrial HMI, medical devices, CNC controls and legacy upgrades.

The Victronix 10.1-inch TFT LCD module pairs a 1024 x 600 widescreen resolution with a normally black LCD cell and a compact 40-pin interface, making it a practical fit for HMIs, control panels and embedded terminals that need more screen area than a 7-inch part without jumping to the cost and power of a large-format display. Normally black means each pixel blocks light when unpowered, so the panel rests at black rather than white — better contrast in dark UI states, no bright glow at the panel edges, and a fail-safe appearance if drive is lost.