China Portrait LCD module Manufacturer, Supplier, Factory

This Victronix 2.8 inch Resistive Touch IPS TFT Module is a high-quality 2.8 inch TFT LCD module engineered for embedded applications requiring exceptional clarity and reliability. Featuring 240×320 resolution and 262K color depth, this module delivers vibrant imagery with wide 80° viewing angles in all directions. Engineered for reliability in harsh environments, it operates seamlessly from -20°C to +70°C and withstands rigorous industrial validation tests. As a leading manufacturer and supplier of TFT modules in China, we are proud to offer the Victronix 2.8 inch TFT Module. This product not only complies fully with ROHS environmental standards, ensuring exceptional performance in various applications, but we also provide customized services to meet our customers' specific needs.

The VXT430INS-15 is a 4.3-inch 480 x 272 TFT LCD module built for products that get knocked about. Its reliability programme runs ten tests at 240 hours and includes the three most often missing at this size - 60 G mechanical shock on six faces, 6 hours of vibration across three axes, and ESD at 8 kV air and 4 kV contact - which is what makes it a panel for vehicles, mobile equipment and machine control rather than for a bench instrument. Brightness is quoted with a floor you can enforce at incoming inspection and a ceiling that shows the spread across a shipment, and both are rare at any price. Two things decide whether it suits your product. It is a TN panel: the specification states a 12 o'clock viewing direction, grey-scale inversion at 6 o'clock and unequal vertical angles, so do not mount it where the operator looks up at it - if your orientation is not under your control, an all-direction panel in this size is the better buy and we will say so. And the timing chapter is published only as diagrams, so ask us for the clock frequency and the porch values before you configure a controller.

The VXT500BWS-03C0 is a 5.0-inch TFT LCD module with 800 x 480 pixels and a projected capacitive touch panel. Three things decide whether it suits your product. Brightness is 800 cd/m² minimum against 1000 typical — a stated floor you can hold us to, and roughly three times what our touchless 5-inch panel delivers. Viewing angle is 80° minimum in all four directions with no preferred orientation and no grey-scale inversion, so how you mount it is a mechanical decision rather than an optical one. And it shares an active area, resolution, pixel pitch and outline with our touchless 5-inch module, so an existing 5-inch 800x480 design takes it without recutting the enclosure. The display runs 24-bit RGB on a 40-pin FPC from a single 3.3 V rail, with touch on its own 10-pin I2C connector carrying reset and interrupt.

The VXTA10BXH-01C is a 10.1-inch 1280x800 TFT with an integrated capacitive touch panel, driven over 4-lane MIPI DSI. Against our 10.4-inch 800x600 module it carries 2.1 times the pixels through 35% fewer pins — 39 instead of 60, and 32 functional instead of 43 — because four differential pairs move the whole image. Touch is on the module with an FT5426, so there is no separate flex to route. The backlight has PWM in and PWM out, so dimming is handled on the module rather than in your firmware. It is 16:10 at 150 PPI, anti-glare, with 80° viewing in all four directions and no gray scale inversion — together the signature of an IPS cell. Contrast is 700 minimum. The document has real problems, listed here: an active-area figure that does not reconcile, a touch controller with no I2C pins, and a brightness figure with no minimum.

The VXT021MCSA-02 is a round TFT LCD module — the only round display in our range. Its 53.28 mm active diameter is 2.0976 inches, driven as a 480x480 array at 229 PPI. Built for smart watches: 230 µA sleep current, a 1.45 mm bezel, and 56.18 × 59.71 × 2.2 mm outline. Optics are specified with minimums, not just typicals — 530 cd/m² and 800:1 guaranteed, 600 and 1000:1 typical, with 80° viewing in all directions. Rated -20 to +70°C.

The VXT101BAH-02 is a 10.1 inch color TFT LCD module for equipment that uses separate buttons, keypads or host controls. Its landscape display and LVDS interface provide a platform for presenting menus, measurements and operating information.