China R0-R7 G0-G7 B0-B7 RGB interface TFT Manufacturer, Supplier, Factory

Victronix 5.7 inch 640×480 TFT Module offers a high typical brightness of 1000 cd/m² and a typical contrast ratio of 450:1, ensuring excellent readability from various viewing positions. Secondly, it supports 18-bit RGB parallel digital and SYNC (HSYNC/VSYNC) & DE modes. Besides, it features a 21-die White LED backlight with a lifetime of 30,000 to 50,000 hours (retaining 50% brightness), ensuring clarity and usability in various lighting conditions. It also undergoes rigorous tests, including high/low temperature storage and operation, temperature cycling, humidity, vibration, and shock. Consequently, it can operate effectively across an extensive temperature range of -20°C to +70°C. This Victronix 5.7 inch TFT display is widely used in Factory automation HMI, medical monitors, test & measurement equipment, transportation systems, and embedded control panels requiring sunlight-readable, high-reliability displays.

The VXT350MHSA-08 is a 3.5-inch portrait TFT module: 320 x 480 pixels over an active area of 48.96 x 73.44 mm, in a true 2:3 shape. What distinguishes it is how many ways it can be driven — RGB parallel, 3-wire SPI, 4-wire SPI and 8080-style MCU parallel all sit on one 50-pin connector, selected by three pins, IM0, IM1 and IM2, read at power-up. That means the interface stops being a decision you must make before choosing a display: you can prototype on SPI and move to RGB when you need the refresh rate, without changing the module, the connector or the enclosure. Driven by an ST7796U, it also runs its 3.0 V backlight with no boost converter — no inductor, no switching noise — unlike the other 3.5-inch modules in the range which need 18 to 19 V. Contrast is given as an 800:1 minimum, viewing angle is 80° in all four directions with viewing direction ALL, and total consumption is about 0.41 W from a measured 19.51 mA of logic current.

The VXO-011AMA-097 is a 1.1-inch AMOLED in a 7:3 portrait format — taller, relative to its width, than any other display we make. A band's width is fixed by the strap but its height is not, and against our 0.95-inch band module this panel gives 294 rows instead of 240: 22.5% more vertical content for 1.5% more width. Same driver, same interface, same touch — just more room to stack readings. It also has touch on its own independent supply rails, so the touch layer can stay awake while the display sleeps. No backlight, 60,000:1 contrast, 420 cd/m², about 0.058 W at full white. RM69310, SPI, -20 to +70°C.

The CTP-T430GF-04 is a 4.3-inch capacitive touch panel in G+G construction, sized for 480x272 displays and matched to the 95.84 x 54.66 mm view area of our 4.3-inch TFT module. It runs from two rails — VDD at 2.8–3.3 V and IOVCC at a fixed 3.3 V — and its 10-pin FPC puts VDD on pin 10 rather than pin 2. Rated -10 to +60°C, it is built for indoor and commercial equipment rather than industrial extremes. EETI EXC3146 controller, five-point touch.

The VX50472 is a VA segment LCD module with six digits, dedicated status icons and a white LED backlight. A 64 × 32 mm outline, 3V LCD drive and COG + FPC construction support integration into compact instruments and control panels.

The VXT430BPI-01ND is a 4.3-inch 480x272 industrial TFT LCD module with a standard RGB interface and ILI6485 controller. It delivers 16.7M colors, 300 cd/m2 brightness, a 700:1 contrast ratio and a 20 ms response time, backed by a 7S1P white LED backlight rated for 30,000 to 50,000 hours. Operating from -20°C to +70°C and RoHS compliant, it is built for industrial HMIs, automotive dashboards and medical monitoring devices. Custom FPC, touch panel and cover glass are available.