China square pixel 800x480 display Manufacturer, Supplier, Factory

The Victronix VXT350QHI-26C​ is a 3.5-inch 320 × 480 portrait TFT LCD module with a capacitive touch panel, driven by ILI9488. What sets it apart: three interface families on one connector​ — 24-bit RGB, MCU parallel, and SPI — selected by three strap pins. And unlike most modules in this range, the drawing actually gives you figures to design to.

The VXT800BYH-01 is an 8.0-inch 800 x 1280 portrait TFT LCD module driven by an HX8260 over a 4-lane MIPI DSI interface on a 24-pin FPC, and the reason a panel this size ships on 24 pins is the interface. Four differential data lanes plus one differential clock pair carry what a 24-bit parallel RGB bus would need fifty pins to carry, so a 1,024,000-pixel display fits a host with a DSI peripheral and almost no other pins to spare. It is the most portrait panel here - 800 x 1280 in a 16:10 column - with square 0.13455 mm pixels at 188.8 PPI, 16.7M colours stated outright, and a diagonal of 203.09 mm that lands within 0.05 per cent of the nominal 8.0 inch. And TE is brought out on pin 4, which is the tearing effect output: with a 2.0 MB frame buffer too big to double cheaply, being able to stay single-buffered and still write tear-free is the difference between a workable design and an expensive one. Three things need settling before you commit. The logic voltage is stated two ways and they do not agree: pin 7 is annotated IOVCC 1.8V while the electrical table's supply-voltage-for-logic row gives 2.8 V typical, and the thresholds are written as fractions of VDD without saying which rail, so a 1.8 V host is either comfortably inside or well outside depending on which figure holds. The storage temperature runs -30 to +70 against an operating range of -20 to +70, so the high end is not wider at all - storage should be wider at both ends and here it is not. And the backlight's seven-in-series array is derived rather than stated, and it puts 27 mA through each string against a 30 mA absolute maximum.

The VXT350PNO-01P is a 3.5-inch 480 x 272 TFT LCD module with a 4-wire resistive touch panel, Resistive sensing responds to pressure rather than to a finger's conductivity, so it works with gloves, wet hands, a stylus or a tool tip - which is why it remains the choice for industrial and medical equipment. The backlight is the most trustworthy figure in the document, because it is confirmed three independent ways: the block diagram states the circuit as 1 * 6LED, six in series; 19.2 V over six gives exactly 3.20 V per LED, which is the typical forward voltage the electrical table states; and the connector carries one cathode and one anode, which is what a single string looks like. Reliability is equally solid - nine tests, all at 240 hours, with a stated 50,000-hour MTBF.

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 3.5 inch Tianma Panel RTP TFT module is a durable 3.5 inch TFT LCD module designed for demanding embedded applications. Combining a bright transmissive display with integrated resistive touch technology, this module delivers exceptional optical performance and reliability in a compact form factor (76.90 × 63.90 × 4.15 mm).

This Victronix 15.0 inch 1024*768 IPS TFT Module is a high-performance electrical module designed to deliver reliable power management in demanding applications. It provides customers with a premium display, featuring an 800×800 resolution within a 304.128×228.096 mm active area, an 89° viewing angle (all directions), and a typical brightness of 450 cd/m². As a professional TFT module manufacturer and supplier in China, this Victronix 15 inch TFT Module strictly complies with the ROHS environmental standards to provide superior application performance. Additionally, we provide customized services tailored to meet the specific needs of our clients. This Victronix 15 inch TFT Module is designed for factory automation control systems, visualization tools, tool machine control systems, medical devices, advertising machines, robots, smart homes, notebooks, digital camera applications, industrial equipment devices, and other electronic products.

The CTP-T430GF-04 is a 4.3-inch capacitive touch panel in G+G construction, sized for 480x272 displays and matched to the 95.84 x 54.66 mm view area of our 4.3-inch TFT module. It runs from two rails — VDD at 2.8–3.3 V and IOVCC at a fixed 3.3 V — and its 10-pin FPC puts VDD on pin 10 rather than pin 2. Rated -10 to +60°C, it is built for indoor and commercial equipment rather than industrial extremes. EETI EXC3146 controller, five-point touch.