China wide temperature TFT LCD Manufacturer, Supplier, Factory

This Victronix 9 inch 800x480 TFT Module is a high-performance 9 inch TFT LCD module engineered for demanding industrial applications. Featuring an 800×480 RGB resolution and a 16:9 aspect ratio, it delivers crisp, vibrant visuals with an active display area of 198.0 × 111.7 mm (7.80 × 4.40 inches). The module leverages a 24-bit RGB interface and advanced driver ICs (HX8664-B + HX8264-E) for seamless integration and reliable signal processing.

This Victronix 1.3 inch 240x240 Round IPS TFT Module is a high-quality 1.3 inch TFT display engineered for demanding applications. Featuring a 240×240 RGB IPS panel with exceptional 450 cd/m² brightness and 1100:1 contrast ratio, this module delivers vivid visuals with consistent 85° viewing angles in all directions. As a professional manufacturer and supplier of TFT modules in China, Victronix 1.3 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 2.2 inch 240x320 Capacitive Touch TFT Module is a compact 2.2 inch TFT LCD module engineered for reliable performance in demanding applications. It features a sharp 240×320 resolution (RGB) across a 33.84×45.12 mm active area. The display provides a white LED backlight, ST7789V2 IC driver, FPC connection with an 18-bit RGB interface, a 6 o'clock viewing direction, and a brightness of 330 nits. Besides, it offers a capacitive touch panel and supports multi-finger touch. This Victronix 2.2 inch display is commonly used in smart wearables, smartwatches, household appliances, toys, and medical devices.

The VXT121QXHA-01 is a 12.1-inch TFT module with 1024 x 768 pixels, and it is the only 4:3 panel in our 12.1-inch range — the other two are 1280 x 800. That matters because XGA in a 4:3 layout is what a very large installed base of industrial controllers, medical instruments and test equipment was designed around, and it remains the usual target when a display in existing hardware has to be replaced. The active area is 245.76 x 184.32 mm with pixels that are square to ten decimal places, so circles and dial scales stay true. Brightness is 1000 cd/m², the highest figure we publish in this size, and the viewing angle is 85° in all four directions with no stated best direction. The interface is 4-lane LVDS on a 20-pin connector, and it runs from a single 3.3 V rail — no separate gate or analogue supplies to generate. We are equally direct about what this module demands and what is not yet documented: the backlight draws about 14 W, which is over 90% of the module's total power and needs a real thermal plan; brightness and viewing angle are given as typical values without stated minimums; and the driver IC, outline dimensions and LVDS data mapping are not in the file we hold.

The VXT101MBAH-02 is a 10.1-inch TFT module with a 4-lane LVDS interface — the differential interface in our range. At 1024x600 with 16.7M colours, a parallel RGB bus would need around 28 signal lines switching at pixel-clock rates; LVDS carries the same payload over four data pairs and one clock pair, ten wires, with lower emissions and tolerance of real cable distance. It is a native 16:9 panel with a 222.72 x 125.28 mm active area, 380 cd/m² and 500:1 contrast. It needs five supply rails and 1.17 MB of external frame memory. Rated -20 to +70°C.

The CTP-T430GF-04 is a 4.3-inch capacitive touch panel in G+G construction, sized for 480x272 displays and matched to the 95.84 x 54.66 mm view area of our 4.3-inch TFT module. It runs from two rails — VDD at 2.8–3.3 V and IOVCC at a fixed 3.3 V — and its 10-pin FPC puts VDD on pin 10 rather than pin 2. Rated -10 to +60°C, it is built for indoor and commercial equipment rather than industrial extremes. EETI EXC3146 controller, five-point touch.