China 1024x600 RGB TFT display module Manufacturer, Supplier, Factory

This Victronix Replace HTN Segment Varitronix LCD Module is a high-performance monochrome dot-matrix Liquid Crystal Display (LCM) module for industrial and embedded applications. Featuring a transflective HTN (High-Twist Nematic) panel with a positive display and optimal 6 o’clock viewing direction, this module delivers clear visibility across diverse lighting conditions.

This Victronix 15.0 inch 1024*768 IPS TFT Module is a high-performance electrical module designed to deliver reliable power management in demanding applications. It provides customers with a premium display, featuring an 800×800 resolution within a 304.128×228.096 mm active area, an 89° viewing angle (all directions), and a typical brightness of 450 cd/m². As a professional TFT module manufacturer and supplier in China, this Victronix 15 inch TFT Module strictly complies with the ROHS environmental standards to provide superior application performance. Additionally, we provide customized services tailored to meet the specific needs of our clients. This Victronix 15 inch TFT Module is designed for factory automation control systems, visualization tools, tool machine control systems, medical devices, advertising machines, robots, smart homes, notebooks, digital camera applications, industrial equipment devices, and other electronic products.

The VXT430MPIA-03 is a 4.3-inch TFT module with a 480 x 272 RGB panel, an ILI6485D driver and a 5S2P white LED backlight, and no touch panel. It is the display-only member of a pair: the VXT430MPIA-03C is the same module with five-point capacitive touch bonded on. Comparing the two gives something most suppliers cannot show — a measured figure for what adding touch actually costs. This module is rated 500 cd/m² and the touch version 400, on otherwise identical hardware: same panel, same driver, same backlight, same timing, and CIE colour coordinates matching to four decimal places. That difference is the touch panel, and it works out at about 20 per cent of your brightness. Beyond that it is a well-documented module: 800:1 contrast minimum, a published logic current of 22 mA giving a calculable total of about 0.67 W, and full timing tables for three operating modes.

The VXT350FPQI-01 is a transflective, sunlight readable 3.5-inch TFT module for equipment that moves between indoor and outdoor light. Outdoors it reads by reflected light, and the backlight can be switched off entirely rather than merely dimmed, removing the largest load in the module. It is the third transflective panel in our range and the only one you can drive over a 3-wire SPI from an ordinary microcontroller — 240x320 portrait, square pixels, ILI9341V, 0.384 W backlight. Rated -20 to +70°C with ±8 kV air ESD.

The VXT500BWEF-01 is a 5.0-inch transflective TFT LCD module with 800x480 resolution — the only transflective panel in our range. It reads in sunlight by reflecting ambient light rather than outshining it, and the backlight can be dimmed or switched off outdoors, cutting power sharply. Brightness is 200 cd/m² with 60:1 contrast and a 15 ms response, the fastest we specify. The panel is a 6 o'clock type and the logic rail runs from 2.5 V to 3.3 V. Rated -20 to +70°C.

The VXT430HPWA-03C is a 4.3-inch TFT LCD module with 480x272 resolution and integrated capacitive touch, wired as two independent subsystems: the display runs on its own 40-pin interface and VDD rail, while the FT5446 touch controller has a separate 6-pin FPC and its own VDD-CTP supply. That lets you power the display down and keep touch alive, or reset touch without touching the display. Rated 850 cd/m² and -30 to +85°C, it suits outdoor handheld terminals, field instruments and portable equipment.