China 4.3 inch resistive touch display Manufacturer, Supplier, Factory

To be the stage of realizing dreams of our employees! To build a happier, far more united and far more specialist team! To reach a mutual profit of our customers, suppliers, the society and ourselves for 4.3 inch resistive touch display,4.3 inch TFT LCD module,4.3 inch TFT display,4.3 inch LCD display module,4.3 inch LCD panel, We will keep working hard and as we try our best to supply the best quality products, most competitive price and excellent service to every customer. Your satisfaction, our glory!!!
4.3 inch resistive touch display, We're in continuous service to our growing local and international clients. We aim to be worldwide leader in this industry and with this mind; it is our great pleasure to serve and bringing the highest satisfaction rates among the growing market.

Hot Products

  • 10.1 Inch 1280x800 TFT LCD Module with CTP HDMI Interface - VXT101IEWA-03-B

    10.1 Inch 1280x800 TFT LCD Module with CTP HDMI Interface - VXT101IEWA-03-B

    This Victronix 10.1 inch 1280x800 HDMI TFT Module is a high-performance 10.1 inch TFT-LCD module for superior visual clarity and responsive interaction. Designed with a crisp 1280×800 resolution, this module delivers sharp imagery and clear text, ideal for industrial control panels, embedded systems, digital signage, and interactive kiosks.
  • 3.5 Inch 480x272 TFT LCD Module with Resistive Touch 24-Bit RGB - VXT350PNO-01P

    3.5 Inch 480x272 TFT LCD Module with Resistive Touch 24-Bit RGB - VXT350PNO-01P

    The VXT350PNO-01P is a 3.5-inch 480 x 272 TFT LCD module with a 4-wire resistive touch panel, Resistive sensing responds to pressure rather than to a finger's conductivity, so it works with gloves, wet hands, a stylus or a tool tip - which is why it remains the choice for industrial and medical equipment. The backlight is the most trustworthy figure in the document, because it is confirmed three independent ways: the block diagram states the circuit as 1 * 6LED, six in series; 19.2 V over six gives exactly 3.20 V per LED, which is the typical forward voltage the electrical table states; and the connector carries one cathode and one anode, which is what a single string looks like. Reliability is equally solid - nine tests, all at 240 hours, with a stated 50,000-hour MTBF.
  • 2.1 Inch Round 480x480 TFT LCD Module 1000:1 Contrast Low Power - VXT021MCSA-02

    2.1 Inch Round 480x480 TFT LCD Module 1000:1 Contrast Low Power - VXT021MCSA-02

    The VXT021MCSA-02 is a round TFT LCD module — the only round display in our range. Its 53.28 mm active diameter is 2.0976 inches, driven as a 480x480 array at 229 PPI. Built for smart watches: 230 µA sleep current, a 1.45 mm bezel, and 56.18 × 59.71 × 2.2 mm outline. Optics are specified with minimums, not just typicals — 530 cd/m² and 800:1 guaranteed, 600 and 1000:1 typical, with 80° viewing in all directions. Rated -20 to +70°C.
  • 21.5 Inch G+G Capacitive Touch Panel for 1920x1080 Displays - CTP-VX215A5698-GG

    21.5 Inch G+G Capacitive Touch Panel for 1920x1080 Displays - CTP-VX215A5698-GG

    The CTP-VX215A5698-GG is a 21.5-inch capacitive touch panel in G+G construction, sized for 1920x1080 displays and for the enclosures, VESA mounts and kiosk cabinets already built around that format. It adds touch to an existing panel instead of replacing the whole assembly. Transmittance is at least 85% with ≥6H surface hardness, response is ≤12 ms, and it runs from 2.8 to 3.3 V. Suited to kiosks, POS, industrial HMI and education displays, and to retrofitting touch onto existing 21.5-inch hardware.
  • 7.0

    7.0" 800x480 Wide Temperature IPS TFT Module

    The Victronix VXT700SWHW-01 is rated to +85°C, and down to -30°C — a 15°C wider window at the top and 10°C at the bottom than the usual industrial range. That difference is what lets a display live in a sealed enclosure under a hot roof, next to a power stage, or in a vehicle parked in direct sun, without a heater or a fan. Helping it along is a genuinely low power draw: just 100 mA typical at 3.3 V, about 0.33 W for the panel logic, so the module adds little heat of its own to an already hot box. The 800 x 480 panel uses square 0.1905 mm pixels for undistorted graphics, connects over single-channel LVDS on a compact 20-pin I-PEX or JAE connector, and offers MODE (6/8-bit) and SC (scan direction) control pins plus a separate 6-pin backlight connector with BLEN enable and VPDIM PWM dimming.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept