China 4.3 inch TFT display module Manufacturer, Supplier, Factory

We aim to understand high quality disfigurement through the output and supply the most beneficial support to domestic and overseas buyers wholeheartedly for 4.3 inch TFT display module,4.3 inch TFT LCD module,4.3 inch TFT display,4.3 inch LCD display module,4.3 inch LCD panel, For additional information and facts, please speak to us as quickly as possible!
4.3 inch TFT display module, Being the top solutions of our factory, our solutions series have been tested and won us experienced authority certifications. For additional parameters and item list details, be sure to click the button to acquire additional nformation.

Hot Products

  • 7.0 Inch 800x480 TFT LCD Module RGB Interface with Touch Panel - VXT700WHA-02P

    7.0 Inch 800x480 TFT LCD Module RGB Interface with Touch Panel - VXT700WHA-02P

    The Victronix VXT700WHA-02P​ is a 7.0-inch 800 × 480 TFT LCD module with a touch panel, driven by MOS_CHIP_G424A​ over an 18-bit parallel RGB interface on a 40-pin 0.5 mm Hirose FH19-40S-0.5SH connector. The reason to look at it is the interface freedom.​ A MODE pin selects between DE mode and SYNC mode, so it works with hosts that emit DE and hosts that emit only HS and VS. L/R and U/D give hardware scan inversion.​ And full numeric timing is published​ — 860 clocks by 528 lines at 27.2 MHz, which is exactly 60 Hz.
  • 2.8 Inch 240x320 Portrait IPS TFT LCD Module with Resistive Touch MCU/RGB - VXT280BQI-08P

    2.8 Inch 240x320 Portrait IPS TFT LCD Module with Resistive Touch MCU/RGB - VXT280BQI-08P

    This Victronix 2.8 inch Resistive Touch IPS TFT Module is a high-quality 2.8 inch TFT LCD module engineered for embedded applications requiring exceptional clarity and reliability. Featuring 240×320 resolution and 262K color depth, this module delivers vibrant imagery with wide 80° viewing angles in all directions. Engineered for reliability in harsh environments, it operates seamlessly from -20°C to +70°C and withstands rigorous industrial validation tests. As a leading manufacturer and supplier of TFT modules in China, we are proud to offer the Victronix 2.8 inch TFT Module. This product not only complies fully with ROHS environmental standards, ensuring exceptional performance in various applications, but we also provide customized services to meet our customers' specific needs.
  • 4.3 Inch 480x272 TFT LCD Module 24-Bit RGB Wide Viewing Angle - VXT430PNO-01

    4.3 Inch 480x272 TFT LCD Module 24-Bit RGB Wide Viewing Angle - VXT430PNO-01

    The VXT430PNO-01 is a 4.3-inch TFT LCD module at 480 x 272, The specification states the recommended viewing direction as ALL and names the technology as MVA, gives 80 degrees in all four directions, and leaves the grey-scale inversion direction blank - three consistent signals that mean there is no wrong way to mount it. On a TN panel a preferred direction and an inversion direction are stated, and a unit mounted where the operator looks up at it can land on the wrong side; here that decision disappears. The frame buffer is 255 KB, small enough that a microcontroller with 512 KB of internal SRAM needs no external RAM at all. Luminance is 280 minimum against 350 typical and 420 maximum, so there is a floor to hold us to and a ceiling that shows the spread. The backlight is twelve LEDs in six series strings of two, at 19.2 V and 40 mA drawing 0.768 W, with 30,000 hours minimum life. Reliability runs nine tests at 240 hours including vibration, ESD and an MTBF of 50,000 hours. Two cautions.
  • 1.6 Inch 400x400 Round TFT LCD Module QSPI Interface - VXT016VCSA-01

    1.6 Inch 400x400 Round TFT LCD Module QSPI Interface - VXT016VCSA-01

    The VXT016VCSA-01 is a 1.6-inch round TFT module with a QSPI interface — the only module in our range with a four-lane serial pixel bus. Small round displays usually want a serial interface because pins are scarce, but 400x400 is 160,000 pixels and single-lane SPI struggles to move a full frame; QSPI carries four bits per clock, roughly four times the throughput at 62.5 MHz, while still using only four data pins. It is also the smallest and densest panel we make at 1.6 inches and 255 PPI with square pixels. ST77903, 16.7M colours, 3.0 V backlight needing no boost, -20 to +70°C.
  • 7.0

    7.0" 1024x600 Capacitive Touch TFT LCD Module, 1000 cd/m²

    The Victronix VXT700QAEW-01C is a 7.0-inch TFT LCD module that ships as a finished touch assembly rather than a bare panel. A projected-capacitive sensor, G+G construction, 6H surface hardness, at least 85% light transmittance — so there is no second touch part to source, no alignment step and no bonding process in your build. Luminance is 1000 cd/m² typical with an 80/80/80/80 viewing angle, video arrives over 40-pin LVDS driven by EK79001HN and EK73215BCGA, with an ILI2130 touch controller. Rated -30°C to +85°C, RoHS compliant.
  • 4.3 inch 480x272 RGB TFT LCD Module VXT430BPI-01ND

    4.3 inch 480x272 RGB TFT LCD Module VXT430BPI-01ND

    The VXT430BPI-01ND is a 4.3-inch 480x272 industrial TFT LCD module with a standard RGB interface and ILI6485 controller. It delivers 16.7M colors, 300 cd/m2 brightness, a 700:1 contrast ratio and a 20 ms response time, backed by a 7S1P white LED backlight rated for 30,000 to 50,000 hours. Operating from -20°C to +70°C and RoHS compliant, it is built for industrial HMIs, automotive dashboards and medical monitoring devices. Custom FPC, touch panel and cover glass are available.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept