China 4.3 inch TFT LCD wide temperature range Manufacturer, Supplier, Factory

The VXT320HQS-02P is a 3.2inch, 240x320 portrait mode TFT LCD display module with a resistive touch panel (RTP). It features a resolution of 240x320 dots and a brightness of 300 cd/nits (typical value), with a contrast ratio of 500:1 (typical value). Equipped with a built-in ILI9341 driver IC, it supports 8080 MCU 8-bit/16-bit SPI (3-Wire/4-Wire) interfaces. The module measures 55.94mm (W) x 77.60mm (H), with an active area size of 48.6 x 64.8 mm. It functions efficiently within a temperature range of -20℃ to +70℃, while its storage capabilities extend from -30℃ to +80℃. If customers require a high brightness backlight, please contact us for custom solution.

The VXT500BWS-03C0 is a 5.0-inch TFT LCD module with 800 x 480 pixels and a projected capacitive touch panel. Three things decide whether it suits your product. Brightness is 800 cd/m² minimum against 1000 typical — a stated floor you can hold us to, and roughly three times what our touchless 5-inch panel delivers. Viewing angle is 80° minimum in all four directions with no preferred orientation and no grey-scale inversion, so how you mount it is a mechanical decision rather than an optical one. And it shares an active area, resolution, pixel pitch and outline with our touchless 5-inch module, so an existing 5-inch 800x480 design takes it without recutting the enclosure. The display runs 24-bit RGB on a 40-pin FPC from a single 3.3 V rail, with touch on its own 10-pin I2C connector carrying reset and interrupt.

Victronix is a professional TFT module manufacturer and supplier in China. We have been in this field for 18 years and developed several models. We offer a customized service to meet the needs of our customers. This Victronix 10.4 inch 800×600 TFT Module is a high-performance 10.4 inch 800x600 TFT Module engineered for demanding environments. Featuring an 800×600 RGB resolution and supporting 262K colors, this display delivers crisp, vibrant visuals with wide viewing angles (70° at 3/6/9 o’clock, 60° at 12 o’clock).

The VXT700MYIA-03C is a 7-inch front panel assembly: a display and touch stack under a custom cover glass carrying three functional openings — a camera window, a proximity sensor window and a microphone through-hole. The ink over the openings is specified with a number you can measure: visible light transmittance at 520 nm below 25%, which is what lets the proximity sensor hide behind the glass while still passing IR. Everything runs on one 40-pin flex at 0.30 mm pitch, and that flex carries the LED backlight as well, so there is one connector rather than two. The glass has an anti-fingerprint coating, there is black electromagnetic shielding on both sides, and the section gives a 2.25 mm finished stack with component height capped at 1.8 mm. This is a mechanical drawing, so the page is explicit about what is not in it: no resolution, interface, pin assignment, optical or environmental data.

The CTP-T700IXN-06C is a 7-inch capacitive touch panel in G+G construction, and the most completely specified one we publish — outline, view area, drive IC, interface, I2C address, touch-point count and connector are all stated, so you can design with it straight away. It uses an FT5426 controller over I2C, supports five touch points, and is rated ≥7H. The gasket carries double-side tape, so it fits to a display without bonding equipment. Built for industrial HMI, control panels, portable terminals and retrofit work.

The VXT101BAHA-01C pairs a color TFT LCD with GT928 capacitive touch control. Its dedicated I2C touch connection and LVDS display interface suit embedded designs that bring on-screen controls, equipment readings and status information into one operator panel.