China 7 inch TFT with front camera Manufacturer, Supplier, Factory

The VXT350CQH-05 is a 3.5-inch 320 x 240 QVGA TFT LCD module, and two things about it are worth knowing before anything else. It is 3.2 mm thick, the thinnest module in this range on the same 76.90 x 63.90 mm footprint, and it carries no touch panel - so if your product has a separate touch solution, or none, you are not paying for one. The backlight is confirmed twice over: the mechanical drawing shows the LED circuit as six dies in one string from LEDA to LEDK, and 19.2 V over six gives exactly 3.20 V per LED, while the stated 0.384 W matches 19.2 V x 20 mA exactly. Response time is also better documented than usual, with both Ton and Toff published and floors on each - 15 and 30 ms on, 35 and 50 ms off - and contrast carries a 200 minimum. Two things need settling before you commit. This is a TN panel: the specification states a 12 o'clock viewing direction with grey-scale inversion at 6 o'clock, and vertical angles of 50 and 60 degrees, so mounting orientation has a right answer - if your product is handheld and the orientation is not under your control, ask us about a panel with no preferred direction. And the timing chapter runs three pages and is published entirely as diagrams, with a note saying the sequences are for reference only and referring you to the HX8238D data sheet, so there is nothing in this document to configure a controller from.

The VXT500BKI-01F is a 5.0-inch TFT LCD module with 720 x 1280 pixels in portrait - HD resolution on a five-inch panel, and one of the highest pixel densities in our range. The pixels are square: 0.08625 mm on both axes, which is exactly what 62.1 mm over 720 pixels and 110.4 mm over 1280 pixels both give, and the shape is an exact 16:9 turned on its side. Brightness is 680 cd/m2 minimum against 850 typical, contrast 1000:1 minimum, and viewing angle 70 degrees minimum in all four directions with no preferred orientation, so how you mount it is a mechanical decision rather than an optical one. Touch is five-point capacitive in a G+G stack rated at 6H and 85% transparency, on its own 7-pin I2C connector. The display runs four MIPI lanes from a single 2.8 V rail, and both the logic current and the backlight power are published, so the total draw can be worked out at roughly 0.93 W.

The Victronix VXT700SWHW-01 is rated to +85°C, and down to -30°C — a 15°C wider window at the top and 10°C at the bottom than the usual industrial range. That difference is what lets a display live in a sealed enclosure under a hot roof, next to a power stage, or in a vehicle parked in direct sun, without a heater or a fan. Helping it along is a genuinely low power draw: just 100 mA typical at 3.3 V, about 0.33 W for the panel logic, so the module adds little heat of its own to an already hot box. The 800 x 480 panel uses square 0.1905 mm pixels for undistorted graphics, connects over single-channel LVDS on a compact 20-pin I-PEX or JAE connector, and offers MODE (6/8-bit) and SC (scan direction) control pins plus a separate 6-pin backlight connector with BLEN enable and VPDIM PWM dimming.

The Victronix VXTL50BJZ-01 is a 21.5-inch TFT LCD module with a native 1920 x 1080 (FHD) resolution, a 16:9 aspect ratio and a 0.24795 mm pixel pitch, delivering sharp Full HD images. It provides 500 cd/m² typical brightness and 1000:1 typical contrast ratio, so content stays clear and consistent across a room. Video is carried by a dual-channel LVDS interface. An anti-glare top polarizer reduces reflections under indoor lighting.It suits digital signage, indoor kiosks, POS and self-checkout terminals, monitors, control rooms and light industrial HMIs. Touch panels, cover glass, HDMI/VGA/DP driver boards and higher-brightness options are available on request.

The VXT700IXN-06C3 combines a compact color display with 10-point capacitive touch and chemically strengthened cover glass. Its glass-on-glass touch structure, LVDS input and I2C touch connection suit space-conscious equipment interfaces.

Victronix is a professional TFT module manufacturer and supplier in China. We have been in this field for 18 years and developed several models. This Victronix 3.4 inch 800x800 Round IPS TFT Module features 800×(RGB)×800 pixel resolution within an 87.6×87.6 mm active area, supporting up to 16.7 million colors for rich, detailed imagery. Combining exceptional optical performance with robust reliability, this display solution delivers crisp visuals across extreme operating conditions.