China high contrast segment display Manufacturer, Supplier, Factory

This Victronix VA Negative LCD Module is a high-performance Vertical Alignment (VA) LCD module featuring negative transmissive technology. Designed for industrial instruments, automotive, smart home, white goods, and medical equipment applications, this module optimizes for vertical viewing with a fixed 6 o'clock viewing angle. As a professional manufacturer and supplier of TFT modules in China, Victronix VA Segment LCD Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 2.8 inch 2.8 inch 240x320 Resistive Touch TFT Module is a high-reliability 2.8 inch TFT display module engineered for demanding industrial, medical, and embedded applications. Combining a crisp 240×320 RGB resolution with integrated 4-wire resistive touch, this module delivers robust performance in compact dimensions (50.00 × 69.20 × 3.55 mm). As a professional manufacturer and supplier of TFT modules in China, Victronix 2.8 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

Victronix VXT350QHI-19: a 3.5 inch portrait TFT LCD module with 320x480 pixels and 262K colors over a 48.96 x 73.44 mm active area. All viewing direction with free grey-scale inversion and 80 degrees at 3, 6, 9 and 12 o'clock alike, so there is no wrong mounting orientation. RGB, MCU and SPI interfaces on one 50-pin FPC selected by IM0, IM1 and IM2, ILI9488 controller, VCI 2.8 V and IOVCC 1.8 V rails so 1.8 V logic drives it directly, 6-LED backlight, 2.25 mm thin, -20 to +70 C operating. For handheld instruments, portable monitors, smart home control panels, POS terminals, medical devices and industrial HMI.

The VXT121QXHA-01 is a 12.1-inch TFT module with 1024 x 768 pixels, and it is the only 4:3 panel in our 12.1-inch range — the other two are 1280 x 800. That matters because XGA in a 4:3 layout is what a very large installed base of industrial controllers, medical instruments and test equipment was designed around, and it remains the usual target when a display in existing hardware has to be replaced. The active area is 245.76 x 184.32 mm with pixels that are square to ten decimal places, so circles and dial scales stay true. Brightness is 1000 cd/m², the highest figure we publish in this size, and the viewing angle is 85° in all four directions with no stated best direction. The interface is 4-lane LVDS on a 20-pin connector, and it runs from a single 3.3 V rail — no separate gate or analogue supplies to generate. We are equally direct about what this module demands and what is not yet documented: the backlight draws about 14 W, which is over 90% of the module's total power and needs a real thermal plan; brightness and viewing angle are given as typical values without stated minimums; and the driver IC, outline dimensions and LVDS data mapping are not in the file we hold.

The VXTA40CAH-01 is a 10.4-inch TFT in 4:3 — the format industrial and medical equipment has been built around for twenty years. Its active area of 211.2 x 158.4 mm is the standard 10.4-inch size, so it drops into a cutout originally cut for a panel of this class, and legacy software written for 800x600 does not letterbox. It is bright at 650 cd/m² typical with a 520 minimum, uses an anti-glare polarizer for factory lighting, and ships without touch so it pairs directly with our 10.4-inch capacitive touch panel. The documentation is also unusually complete: ten reliability test items each citing its IEC and GB standard, a 50,000-hour MTBF, and inspection criteria given in millimetres. 24-bit RGB on 60 pins, -20 to +70°C.

The CTP-T350GF-04 is a 3.5-inch capacitive touch panel in G+G construction, and the only portrait panel in our range — a 48.96 x 73.44 mm view area in a true 2:3 shape, matched to 320x480 displays and to our 3.5-inch portrait TFT module. It is also the only panel whose I/O runs down to 1.8 V, so a 1.8 V-logic host can drive it without a level shifter. An FT5446 controller handles five-point touch over I2C. Built for handheld instruments, wall controllers, elevator panels and portable medical devices.