China TFT module for industrial control panel Manufacturer, Supplier, Factory

Victronix 5.5 inch 1080p TFT Module is a high-quality 5.5 inch TFT LCD module engineered by Victronix Tecenstar for industrial, medical, and embedded systems. It features a resolution of 1080×1920 pixels, a 24-bit RGB interface, and HX8399C driver IC, making it ideal for industrial controls, medical devices, portable electronics, and advanced embedded systems.

This Victronix 6.2 inch 800×480 TFT Module offers a typical brightness of 700 cd/m² and a contrast ratio of 600:1, ensuring excellent readability from various angles. Secondly, it integrates a backlight unit utilizing 18 white LEDs with a typical lifetime of 30,000 to 50,000 hours (to 50% initial brightness), ensuring clear visibility in all lighting conditions. Besides, it supports a 24-bit parallel RGB with DE/SYNC mode control interface and an ILI6123H + ILI5480 controller. In addition, it passes rigorous environmental testing, including thermal shock (-30°C ↔ +80°C cycles), humidity storage (60°C/90% RH), and mechanical vibration, ensuring it can operate seamlessly across an extended temperature range from -20°C to +70°C. This 6.2 inch TFT display by Victronix is commonly used in medical devices, vehicle displays, industrial control systems, and portable instrumentation where readability under varied lighting conditions is critical.

The VXT430INS-15 is a 4.3-inch 480 x 272 TFT LCD module built for products that get knocked about. Its reliability programme runs ten tests at 240 hours and includes the three most often missing at this size - 60 G mechanical shock on six faces, 6 hours of vibration across three axes, and ESD at 8 kV air and 4 kV contact - which is what makes it a panel for vehicles, mobile equipment and machine control rather than for a bench instrument. Brightness is quoted with a floor you can enforce at incoming inspection and a ceiling that shows the spread across a shipment, and both are rare at any price. Two things decide whether it suits your product. It is a TN panel: the specification states a 12 o'clock viewing direction, grey-scale inversion at 6 o'clock and unequal vertical angles, so do not mount it where the operator looks up at it - if your orientation is not under your control, an all-direction panel in this size is the better buy and we will say so. And the timing chapter is published only as diagrams, so ask us for the clock frequency and the porch values before you configure a controller.

The VXT430MPIA-03 is a 4.3-inch TFT module with a 480 x 272 RGB panel, an ILI6485D driver and a 5S2P white LED backlight, and no touch panel. It is the display-only member of a pair: the VXT430MPIA-03C is the same module with five-point capacitive touch bonded on. Comparing the two gives something most suppliers cannot show — a measured figure for what adding touch actually costs. This module is rated 500 cd/m² and the touch version 400, on otherwise identical hardware: same panel, same driver, same backlight, same timing, and CIE colour coordinates matching to four decimal places. That difference is the touch panel, and it works out at about 20 per cent of your brightness. Beyond that it is a well-documented module: 800:1 contrast minimum, a published logic current of 22 mA giving a calculable total of about 0.67 W, and full timing tables for three operating modes.

The VXT700B1YI-03 is a 7-inch TFT module built in portrait: a 103.60 x 162.27 mm outline, 94.2 x 150.72 mm active area, and 800 x 1280 resolution at 216 PPI. Two figures set it apart. The first is orientation — most 7-inch modules are landscape, and this one is tall, which suits forms, lists and scrolling content. The second is brightness: 800 cd/m² minimum and 1000 typical. That minimum is the highest guaranteed brightness in our range, four times the 200 cd/m² minimum of our 10.1-inch module, and it is a floor you can hold a supplier to rather than an average. It runs MIPI DSI on the widely used ILI9881 driver, has an anti-glare top polarizer, 80° minimum viewing in all four directions, and a 20-LED backlight at 1.28 W with 30,000 hours minimum life. One contradiction in the document needs resolving before layout, and we state it rather than pick the reading that looks better.

This Victronix 4.3 inch 480x272 IPS TFT Module with CTP is a high-performance 4.3-inch TFT LCD module designed for demanding embedded and industrial applications. Combining a bright display with responsive multi-touch functionality, this module delivers exceptional visual clarity and user interaction in a compact form factor.