China WVGA LCD module Manufacturer, Supplier, Factory

Our solutions are greatly recognized and reliable by customers and will fulfill continuously altering financial and social requirements for WVGA LCD module,6.2 inch TFT LCD module,6.2 inch TFT display,6.2 inch LCD display module,6.2 inch LCD panel, Our enterprise warmly welcome close friends from everywhere in the environment to go to, examine and negotiate organization.
WVGA LCD module, Our technical expertise, customer-friendly service, and specialized products and solutions make us/company name the first choice of customers and vendors. We have been looking for your inquiry. Let's set up the cooperation right now!

Hot Products

  • 3.5 Inch 320x480 TFT LCD Module SPI + 18-Bit RGB Interface with Resistive Touch Panel - VXT350CHH-01P

    3.5 Inch 320x480 TFT LCD Module SPI + 18-Bit RGB Interface with Resistive Touch Panel - VXT350CHH-01P

    This 3.5 inch TFT display VXT350CHH-01P by Victronix is commonly used in Industrial HMIs & Control Panels, Medical Devices, Portable Test Equipment, Automotive Diagnostics, and IoT Edge Devices.
  • 2.8 Inch 240x320 Portrait IPS TFT LCD Module with Resistive Touch MCU/RGB - VXT280BQI-08P

    2.8 Inch 240x320 Portrait IPS TFT LCD Module with Resistive Touch MCU/RGB - VXT280BQI-08P

    This Victronix 2.8 inch Resistive Touch IPS TFT Module is a high-quality 2.8 inch TFT LCD module engineered for embedded applications requiring exceptional clarity and reliability. Featuring 240×320 resolution and 262K color depth, this module delivers vibrant imagery with wide 80° viewing angles in all directions. Engineered for reliability in harsh environments, it operates seamlessly from -20°C to +70°C and withstands rigorous industrial validation tests. As a leading manufacturer and supplier of TFT modules in China, we are proud to offer the Victronix 2.8 inch TFT Module. This product not only complies fully with ROHS environmental standards, ensuring exceptional performance in various applications, but we also provide customized services to meet our customers' specific needs.
  • 4.3 Inch 480x272 TFT LCD Module with 5-Point Capacitive Touch Panel - VXT430MPIA-03C

    4.3 Inch 480x272 TFT LCD Module with 5-Point Capacitive Touch Panel - VXT430MPIA-03C

    The VXT430MPIA-03C is a 4.3-inch TFT module with a five-point capacitive touch panel bonded on: a 480 x 272 RGB display and an I2C touch controller in one assembly. What sets it apart is practical rather than headline — this is the 4.3-inch module whose power you can actually budget, because it publishes a logic current of 22 mA where the sibling module rated identically leaves it as TBD. Total draw is about 0.67 W, the lowest of any 4.3-inch module we offer with touch. It is also unusually complete on the touch side: accuracy of ±1.5 mm at the centre and ±2.5 mm at the edge, surface hardness of at least 7H, and transparency of at least 85% are all given as numbers. Contrast is 800:1 minimum with 80° viewing in all four directions. Two things need attention before ordering, and both are stated here: the module matches a sibling part on every comparable figure apart from the driver IC, and its reliability programme is shorter than the rest of the range.
  • 7 Inch TFT LCD Module with Custom Cover Glass and Sensor Openings - VXT700MYIA-03C​

    7 Inch TFT LCD Module with Custom Cover Glass and Sensor Openings - VXT700MYIA-03C​

    The VXT700MYIA-03C is a 7-inch front panel assembly: a display and touch stack under a custom cover glass carrying three functional openings — a camera window, a proximity sensor window and a microphone through-hole. The ink over the openings is specified with a number you can measure: visible light transmittance at 520 nm below 25%, which is what lets the proximity sensor hide behind the glass while still passing IR. Everything runs on one 40-pin flex at 0.30 mm pitch, and that flex carries the LED backlight as well, so there is one connector rather than two. The glass has an anti-fingerprint coating, there is black electromagnetic shielding on both sides, and the section gives a 2.25 mm finished stack with component height capped at 1.8 mm. This is a mechanical drawing, so the page is explicit about what is not in it: no resolution, interface, pin assignment, optical or environmental data.
  • 7.0

    7.0" 1024x600 Capacitive Touch TFT LCD Module, 1000 cd/m²

    The Victronix VXT700QAEW-01C is a 7.0-inch TFT LCD module that ships as a finished touch assembly rather than a bare panel. A projected-capacitive sensor, G+G construction, 6H surface hardness, at least 85% light transmittance — so there is no second touch part to source, no alignment step and no bonding process in your build. Luminance is 1000 cd/m² typical with an 80/80/80/80 viewing angle, video arrives over 40-pin LVDS driven by EK79001HN and EK73215BCGA, with an ILI2130 touch controller. Rated -30°C to +85°C, RoHS compliant.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept