China 10.1 inch kiosk display module Manufacturer, Supplier, Factory

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 3.5'' 320x480 IPS TFT Module is a high-quality 3.5 inch TFT LCD module engineered for demanding industrial and embedded applications. Featuring a 320 × 480 RGB resolution with 262K colors, this transflective display delivers sharp visuals with a pixel pitch of 0.153 × 0.153 mm across an active area of 48.96 × 73.44 mm.

Victronix 9 inch 1024×600 IPS TFT Module offers a typical brightness of 500 cd/m², wide viewing angles of 85° in all directions, and a contrast ratio of 800:1, ensuring excellent readability from various angles. Secondly, it supports a LVDS interface with 6-bit/8-bit mode selection (SELB pin control). Besides, it features a 3S13P white LED system with a lifespan of 20,000 to 50,000 hours at half brightness, ensuring long-term use in various industrial applications. In addition, it is validated through thermal shock (-30°C↔80°C), vibration (10-55Hz), mechanical shock (100G), and ESD protection (±2kV HBM) to operate reliably in extreme temperatures (-20°C to +70°C). This Victronix 9 inch LCD is perfect for Industrial Control, Automobile Device, Medical Equipment, Smart Home, Marine Electronics, Fitness Equipment, POS Terminal, ATM Machine, Vending Machine, etc.

The VXT430INS-15 is a 4.3-inch 480 x 272 TFT LCD module built for products that get knocked about. Its reliability programme runs ten tests at 240 hours and includes the three most often missing at this size - 60 G mechanical shock on six faces, 6 hours of vibration across three axes, and ESD at 8 kV air and 4 kV contact - which is what makes it a panel for vehicles, mobile equipment and machine control rather than for a bench instrument. Brightness is quoted with a floor you can enforce at incoming inspection and a ceiling that shows the spread across a shipment, and both are rare at any price. Two things decide whether it suits your product. It is a TN panel: the specification states a 12 o'clock viewing direction, grey-scale inversion at 6 o'clock and unequal vertical angles, so do not mount it where the operator looks up at it - if your orientation is not under your control, an all-direction panel in this size is the better buy and we will say so. And the timing chapter is published only as diagrams, so ask us for the clock frequency and the porch values before you configure a controller.

The VXT430MPIA-03C is a 4.3-inch TFT module with a five-point capacitive touch panel bonded on: a 480 x 272 RGB display and an I2C touch controller in one assembly. What sets it apart is practical rather than headline — this is the 4.3-inch module whose power you can actually budget, because it publishes a logic current of 22 mA where the sibling module rated identically leaves it as TBD. Total draw is about 0.67 W, the lowest of any 4.3-inch module we offer with touch. It is also unusually complete on the touch side: accuracy of ±1.5 mm at the centre and ±2.5 mm at the edge, surface hardness of at least 7H, and transparency of at least 85% are all given as numbers. Contrast is 800:1 minimum with 80° viewing in all four directions. Two things need attention before ordering, and both are stated here: the module matches a sibling part on every comparable figure apart from the driver IC, and its reliability programme is shorter than the rest of the range.

The VXO-119AMA-044 is the first AMOLED module in our range, and that changes more than a specification line. Every other display we make is a TFT LCD with a backlight — an LED string, a driver, often a boost converter, and a brightness that fades. This panel has no backlight at all: each pixel makes its own light, so black is truly off. That gives 60,000:1 contrast, removes the largest power load in the module, and makes it thinner. It is a 1.19-inch round panel at 390x390 and 326 PPI, the sharpest we make, with four interface options — MIPI 2-lane, 3-wire SPI, 4-wire SPI and QAD-SPI — so you can bring it up on SPI and ship on MIPI. About 0.098 W at full white, 1 µA deep standby. RM69330, -20 to +70°C.

The VXT700BAHA-01CA brings color graphics and capacitive touch to compact equipment panels. Its LVDS display connection and I2C touch interface support host-controlled menus, settings and status screens in a single front-panel assembly.