China 128x160 TFT display Manufacturer, Supplier, Factory

This Victronix Transflective Segment Color VA LCD Module is a sophisticated Color Vertical Alignment (VA) Liquid Crystal Display (LCD) Module, designed for applications requiring high segment count and advanced display capabilities. The module is centrally controlled by the UC2621c LCD driver IC, providing the necessary drive signals and interface management. This LCD module has 1/2D, 1/1B driver mode, and it operates from -30℃to +80℃. For industrial instruments, meters, handheld devices, smart home, bicycle, motor and e-car manufacturers.

The CTP-VX238B5696-GG is a 23.8-inch capacitive touch panel in G+G construction, supplied as a standalone component for bonding to a display. It is offered with either AGC or Corning cover glass, and the difference is measurable — Corning withstands roughly two and a half to three times the impact energy in drop-ball testing. Transmittance is at least 85% with ≥6H surface hardness, response is ≤12 ms, and it runs from 2.8 to 3.3 V. Built for kiosks, interactive displays, POS and self-service terminals.

The Victronix VXT700WRA-01 is a 7.0-inch TFT LCD module with 800 x 480 pixel resolution and support for up to 16.7M colors, built for embedded and industrial equipment that needs a compact, easy-to-drive display. Its 24-bit parallel RGB interface with DE (data enable) and DCLK lets most mainstream MCUs and MPUs — STM32, NXP i.MX, Allwinner, Rockchip and similar — drive the panel directly from their on-chip LCD controller, with no LVDS serializer or bridge chip and no extra BOM cost. The module runs from a single 3.3 V logic supply, uses an RM53052 / RM57452 driver IC, and is rated for a -20°C to +70°C operating range, so it works in unheated enclosures and outdoor cabinets.

The VX50472 is a VA segment LCD module with six digits, dedicated status icons and a white LED backlight. A 64 × 32 mm outline, 3V LCD drive and COG + FPC construction support integration into compact instruments and control panels.

The VXT101BAHA-01C pairs a color TFT LCD with GT928 capacitive touch control. Its dedicated I2C touch connection and LVDS display interface suit embedded designs that bring on-screen controls, equipment readings and status information into one operator panel.

Victronix VXT700WHA-04: a high brightness wide temperature 7.0-inch 800 x 480 TFT LCD module, and two numbers define it. It delivers 1000 cd/m2 typical surface luminance from a 27-LED backlight at 27 V and 180 mA for the stated 4.86 W, putting it in daylight-readable territory, and it carries an operating range of -30 to +85 C with storage at -40 to +90 C. Driven by HX5281 over LVDS on a 40-pin 0.5 mm Hirose FH52-40S-0.5SH connector, it is transmissive and normally black with an ALL viewing direction, 16.7M colours, contrast 800 minimum and 1400 typical, response 25 ms typical and 35 ms maximum, uniformity 80 per cent minimum. ESD is the strongest in the range at 8 kV contact and 15 kV air. Brightness is stated at 1000-1100cd/m2.