China 2.4 inch sunlight readable TFT display Manufacturer, Supplier, Factory

Victronix 3.2 inch 240x400 TFT Module VXT320PZS-01, its IPS technology provides consistent color and clarity across wide 80-degree viewing angle in all directions, 450 cd/m² typical brightness, 16.7M colors and a high typical contrast ratio of 1000:1. Secondly, it supports both SPI (3-line serial) and high-speed 24-bit RGB parallel interfaces (configurable for 18/16-bit), offering seamless integration with diverse systems. Besides, it features a 7S white LED backlight system with a lifespan of 20,000 to 50,00 hours, maintaining 50% brightness retention, which ensures long-term usage in various industrial applications. This Victronix 3.5 inch LCD is perfect for Industrial HMI, portable medical devices, instrumentation, IoT displays, embedded systems, and consumer electronics that require a compact, high-quality, and durable display solution.

The VXT430CNH-07C is the capacitive-touch version of our 4.3-inch 480 x 272 panel, and the way it is put together is the reason to look at it. Touch is not squeezed onto the display FPC - it has its own 10-pin connector carrying I2C, reset and interrupt, so the 40-pin display bus stays clean and the two can be routed independently. The mechanical drawing documents the touch panel to a tenth of a millimetre, and the numbers show the touch view area sitting 0.40 mm outside the LCD active area on every side, so there is no dead band at the edges of the screen. Two things decide whether it suits your product. It is a TN panel: the specification states a 12 o'clock viewing direction, grey-scale inversion at 6 o'clock, and vertical viewing angles of 45 degrees one way and 60 the other, so mounting orientation has a right answer - and if your product is handheld or portable and the orientation is not under your control, a panel with no preferred direction is the better buy.

Victronix VXT430TWH-06P is a 4.3-inch TFT LCD module in portrait, and it carries a four-wire resistive touch panel. That combination is easy to overlook and hard to replace. A resistive panel responds to pressure rather than to a finger's conductivity, so it works with gloves, wet or oily hands, a stylus, or the tip of a tool, and it costs less than a capacitive stack — at the price of multi-touch, of 80% transmittance against the 85% a capacitive panel gives, and of a surface that takes a deliberate press. The shape suits a vertical column: the active area is taller than it is wide, so readings stack one per row, scrolling lists and status panels fit naturally, and a portrait enclosure needs no rework. The display itself runs 24-bit RGB on a 40-pin FPC from a single 3.3 V rail, and 130,560 pixels need only 255 KB of frame buffer — small enough that a microcontroller with 512 KB of internal SRAM needs no external RAM at all. Most optical figures carry a stated floor: 310 cd/m² minimum brightness, 400 minimum contrast, 80° minimum viewing angle. Two things want settling before you commit, and we set them out rather than leave them for bring-up: the specification writes the resolution as 480 × 272 while the geometry says the panel is 272 wide by 480 tall, and the driver IC is named two different ways in two different places.

The VXT500BWS-03C0 is a 5.0-inch TFT LCD module with 800 x 480 pixels and a projected capacitive touch panel. Three things decide whether it suits your product. Brightness is 800 cd/m² minimum against 1000 typical — a stated floor you can hold us to, and roughly three times what our touchless 5-inch panel delivers. Viewing angle is 80° minimum in all four directions with no preferred orientation and no grey-scale inversion, so how you mount it is a mechanical decision rather than an optical one. And it shares an active area, resolution, pixel pitch and outline with our touchless 5-inch module, so an existing 5-inch 800x480 design takes it without recutting the enclosure. The display runs 24-bit RGB on a 40-pin FPC from a single 3.3 V rail, with touch on its own 10-pin I2C connector carrying reset and interrupt.

The VXT430BPI-01ND is a 4.3-inch 480x272 industrial TFT LCD module with a standard RGB interface and ILI6485 controller. It delivers 16.7M colors, 300 cd/m2 brightness, a 700:1 contrast ratio and a 20 ms response time, backed by a 7S1P white LED backlight rated for 30,000 to 50,000 hours. Operating from -20°C to +70°C and RoHS compliant, it is built for industrial HMIs, automotive dashboards and medical monitoring devices. Custom FPC, touch panel and cover glass are available.

Victronix VXT700WHA-04: a high brightness wide temperature 7.0-inch 800 x 480 TFT LCD module, and two numbers define it. It delivers 1000 cd/m2 typical surface luminance from a 27-LED backlight at 27 V and 180 mA for the stated 4.86 W, putting it in daylight-readable territory, and it carries an operating range of -30 to +85 C with storage at -40 to +90 C. Driven by HX5281 over LVDS on a 40-pin 0.5 mm Hirose FH52-40S-0.5SH connector, it is transmissive and normally black with an ALL viewing direction, 16.7M colours, contrast 800 minimum and 1400 typical, response 25 ms typical and 35 ms maximum, uniformity 80 per cent minimum. ESD is the strongest in the range at 8 kV contact and 15 kV air. Brightness is stated at 1000-1100cd/m2.