China 4.3 inch TFT for outdoor handheld device Manufacturer, Supplier, Factory

This Victronix 4.3 inch 480x272 TFT Module is a high-performance 4.3 inch TFT-LCD module engineered for demanding applications. Combining a sharp 480 × 272 RGB display, 16.7 million colors, and robust industrial-grade construction, this module delivers exceptional clarity and reliability in harsh environments. RoHS-compliant and backed by rigorous testing, it integrates seamlessly into medical devices, automotive systems, industrial controls, and portable instruments.

Victronix 9 inch 1024×600 IPS TFT Module offers a typical brightness of 500 cd/m², wide viewing angles of 85° in all directions, and a contrast ratio of 800:1, ensuring excellent readability from various angles. Secondly, it supports a LVDS interface with 6-bit/8-bit mode selection (SELB pin control). Besides, it features a 3S13P white LED system with a lifespan of 20,000 to 50,000 hours at half brightness, ensuring long-term use in various industrial applications. In addition, it is validated through thermal shock (-30°C↔80°C), vibration (10-55Hz), mechanical shock (100G), and ESD protection (±2kV HBM) to operate reliably in extreme temperatures (-20°C to +70°C). This Victronix 9 inch LCD is perfect for Industrial Control, Automobile Device, Medical Equipment, Smart Home, Marine Electronics, Fitness Equipment, POS Terminal, ATM Machine, Vending Machine, etc.

The VXT121QXHA-01 is a 12.1-inch TFT module with 1024 x 768 pixels, and it is the only 4:3 panel in our 12.1-inch range — the other two are 1280 x 800. That matters because XGA in a 4:3 layout is what a very large installed base of industrial controllers, medical instruments and test equipment was designed around, and it remains the usual target when a display in existing hardware has to be replaced. The active area is 245.76 x 184.32 mm with pixels that are square to ten decimal places, so circles and dial scales stay true. Brightness is 1000 cd/m², the highest figure we publish in this size, and the viewing angle is 85° in all four directions with no stated best direction. The interface is 4-lane LVDS on a 20-pin connector, and it runs from a single 3.3 V rail — no separate gate or analogue supplies to generate. We are equally direct about what this module demands and what is not yet documented: the backlight draws about 14 W, which is over 90% of the module's total power and needs a real thermal plan; brightness and viewing angle are given as typical values without stated minimums; and the driver IC, outline dimensions and LVDS data mapping are not in the file we hold.

The Victronix VXT700QAEW-01C is a 7.0-inch TFT LCD module that ships as a finished touch assembly rather than a bare panel. A projected-capacitive sensor, G+G construction, 6H surface hardness, at least 85% light transmittance — so there is no second touch part to source, no alignment step and no bonding process in your build. Luminance is 1000 cd/m² typical with an 80/80/80/80 viewing angle, video arrives over 40-pin LVDS driven by EK79001HN and EK73215BCGA, with an ILI2130 touch controller. Rated -30°C to +85°C, RoHS compliant.

The Victronix VXT700SWHW-01 is rated to +85°C, and down to -30°C — a 15°C wider window at the top and 10°C at the bottom than the usual industrial range. That difference is what lets a display live in a sealed enclosure under a hot roof, next to a power stage, or in a vehicle parked in direct sun, without a heater or a fan. Helping it along is a genuinely low power draw: just 100 mA typical at 3.3 V, about 0.33 W for the panel logic, so the module adds little heat of its own to an already hot box. The 800 x 480 panel uses square 0.1905 mm pixels for undistorted graphics, connects over single-channel LVDS on a compact 20-pin I-PEX or JAE connector, and offers MODE (6/8-bit) and SC (scan direction) control pins plus a separate 6-pin backlight connector with BLEN enable and VPDIM PWM dimming.

This Victronix 2.8inch 240*320 Projected capacitive touch IPS TFT Module combines a bright 240×320 IPS TFT panel (16.7M colors, 800 cd/m² brightness) with advanced 5-finger projected capacitive touch (≥6H hardness, ≥85% transparency). As a professional TFT module manufacturer and supplier in China, this Victronix 2.8inch TFT Module uses an industrial-grade design to provide superior application performance.