China I2C interface capacitive touch panel Manufacturer, Supplier, Factory

This Victronix 2.3 inch 320x240 Ili9342c TFT Module is a high-performance 2.3 inch TFT LCD module engineered for demanding industrial applications. Featuring a transmissive display with 320 × 240 RGB resolution, this module delivers sharp, vibrant visuals with 65K colors and a high 500:1 contrast ratio for excellent readability. As a professional manufacturer and supplier of TFT modules in China, Victronix 2.3 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

3.5" 320x480 portrait TFT LCD, 2.2 mm thin, 360 cd/m2 with floor and ceiling. SPI + 18-bit RGB, TE out, 1.65 V logic. This 3.5 inch TFT display by Victronix is commonly used in industrial HMI, medical diagnostics, portable instrumentation, and embedded control systems.

The VXT280CQI-02 is a 2.8-inch 240 x 320 portrait TFT LCD module on a 16-bit 8080 MCU bus,The colour depth is stated outright at 65K, which most specifications leave blank. The diagonal runs over rather than short: 43.20 x 57.60 mm gives exactly 72.0000 mm, or 2.8346 inches against a nominal 2.8, a margin of 1.2 per cent - the widest in this range. The backlight is four white LEDs in parallel, one anode and four cathode pins, at 3.2 V and 60 mA, which is 15 mA per LED against a 30 mA absolute maximum.

The VXT350CHH-08C1 is a 3.5-inch 320 x 480 portrait TFT LCD module with a capacitive touch panel, G+G construction with a 0.7 mm toughened cover lens over 0.55 mm sensor glass, 1.4 mm total thickness, FT5443DQS over I2C, 2.8 to 3.3 V supply with 1.8 V IO, 85% minimum light transmittance, 6H surface hardness, 0.25 J impact energy and 5 touch points. Brightness is the other strong figure: 600 cd/m2 typical with a stated minimum of 480 and a stated maximum of 720, so you get a floor to hold us to and a ceiling that shows the production spread. And the backlight reconciles: 19.2 V over the six dies the block diagram states gives exactly 3.20 V per LED, and the stated 0.768 W matches 19.2 V x 40 mA exactly.

The VXT620HWI-01 is a 6.2-inch TFT LCD module with 800 x 480 WVGA pixels on a 24-bit parallel RGB interface, and its most useful property is not a headline number but how the optical table is written. Luminance is given as 400 minimum, 500 typical and 600 maximum. Contrast carries a 480 minimum against 600 typical. Uniformity is 70% minimum. The module runs on an ILI6123H and ILI5480. Ratings are -20 to +70 °C, and reliability runs 240 hours per condition with 100 thermal shock cycles and 100 G mechanical shock.

The VXT430HWE-03-W is a 4.3-inch TFT module with 800 x 480 resolution — nearly three times the pixel count of the 480 x 272 panels that dominate this size — and an operating range of -30 to +85°C, the widest of any 4.3-inch module we offer. Storage goes to -40°C, the only module in the range rated that low. It is transmissive with an anti-glare polarizer and no touch panel. What stands out is how much is published: brightness of 640 minimum and 800 typical, contrast of 640 minimum and 800 typical, and logic current given for three screen contents — 73 mA on black, 102 mA on a single colour, 105 mA on white — rather than one vague number, which lets you size for the worst case and shows a dark interface genuinely saves power. The backlight is 16 LEDs at 1.024 W, and reliability covers ten tests including vibration at 10-55 Hz and mechanical shock at 60 G, with MTBF of 50,000 hours.